Front Panel Block Connector - FIC CE31-A Manual

CE31-A Mainboard Manual

Front Panel Block Connector

This block connector concludes the connectors for linking with IDE LED,
power LED, remote power button, message LED, suspend button, reset but-
ton and speaker on the front panel of the system case. Please identify polari-
ties of plug wires for the case speaker and LEDs. Please ask vendor about this
information when you buy them and install the system by yourself. The plug
wires' polarities of this buttons will not affect the function.
Power LED (A) is connected with the system power indicator to indicate
whether the system is on/off. When the system enter the suspend mode, it
blinks.
Remote Power Button (B) is connected with remote power (soft power) switch.
Push this switch will turn off and on the system instead of turning the power
switch on the power supply.
Message LED (C) is connected with the message LED. When the system is
running normally, the indicator is off. It is controlled by the operating system
or application software.
Suspend Button (D) is connected with suspend mode switch.
Reset Button (E) is connected to the reset switch. Push this switch to reboot
the system instead of turning power switch off and on.
2 - 18