Advanced Chipset Features - FIC K7M-400A Instruction Manual

BIOS Guardian and Reflash BIOS
BIOS Guardian by default is enabled, thus effectively acting as a fire-
wall against viruses that can attack the BIOS while the system is
running. It must be disabled before you reflash BIOS.
The steps below show you how to turn the BIOS Guardian off and on
when you want to reflash the BIOS:
1. Press Del key while booting and go to CMOS Setup Utility menu.
2. Go to the Advanced BIOS Features submenu.
3. Set the feature BIOS Guardian at Disabled.
4. Save the setting and exit. The system will restart.
5. The POST screen holds; A message about BIOS Guardian shows.
6. Press the Space Bar.
7. Reflash the BIOS. Restart the system after you are finished.
8. The POST screen holds; A message about BIOS Guardian shows.
9. Press G key. The feature, BIOS Guardian, will be enabled again.
Full Screen LOGO Show
This decides whether or not the full screen logo is shown during system
boot ups. The options are: Enabled, Disabled.

Advanced Chipset Features

BIOS Setup
3 - 7