FIC K7M-400A Instruction Manual page 40

K7M-400A Mainboard Manual
Typematic Delay (Msec)
This feature is available only if the item, Typematic Rate Setting, is set at
Enabled. Sets the delay time before a character is repeated.
The options are: 250, 500, 750, 1000 millisecond.
Security Option
Allows you to set the security level of the system.The options: Setup,
System.
APIC Mode
Allows you to decide if the system enters the APIC (Advanced Program-
mable Interrupt Controller) mode or not for more IRQs can be released.
The options are: Enabled, Disabled.
MPS Version Control For OS
When two CPUs are onboard (not a feature of this board) this feature
allows you to select Multi-Processor Spec. (MPS) version control for OS
when the logo test executes. The options are: 1.1, 1.4.
OS Select For DRAM > 64MB
If your operating system (OS) is OS/2, select the option OS2. Otherwise,
stay with the default setting Non-OS2.The options are: Non-OS2, OS2.
HDD S.M.A.R.T. Capability
S.M.A.R.T. stands for Self-Monitoring and Analysis Reporting Technol-
ogy which allows your hard disk drive to report any read/write errors and
issues a warning with LDCM installed. The options: Disabled, Enabled.
Video BIOS Shadow
Enabling this feature will copy the video BIOS to shadow RAM, it will
improve the system performance. The options are: Enabled, Disabled.
BIOS Guardian
It allows the system to prevent computer viruses. Users will need to dis-
able it to update BIOS. The options are: Enabled, Disabled.
NOTE: Please disable the BIOS Guardian feature before you start
to reflash BIOS.
3 - 6