PAK-2005 Mainboard Manual
Front Panel Block Connector: F_PNL
This block connector includes: PW_LED, KB_LOCK, TB_LED, SP_SW, SPK,
SP_LED, IDE_LED, RPW_SW, and RST connectors.
ITEM
CONNECTOR
A
PW_LED
B
KB_LOCK
C
TB_LED
D
SP_SW
E
SP_LED
F
SPK
G
IDE_LED
46
PIN TYPE
2-pin male
The system power LED lights when the system is
powered on.
2-pin male
allows the keyboard to access the system
2-pin male
indicates if the system speed is in normal or turbo
2-pin male
Suspend mode switch allows user to manually
place the system into a suspend mode or "Green"
mode where system activity will be instantly
decreased to save electricity and expand the life
of certain components when the system is not in
use. This connector connects to the case-
mounted suspend switch. Wake-up can be
controlled by settings in the BIOS but the
keyboard will always allow wake-up (the SP_SW
connector cannot wake-up the system). If you
want to use this connector, the corresponding
function in the Power Management Setup of the
BIOS software section should be on the default
setting of Enable.
2-pin male
indicates the system is in Suspend mode when
LED is lit
4-pin male
This connector connects to the case-mounted
speaker.
2-pin male
This connector supplies power to the cabinet's
FEATURE