In Mac Os - National Instruments 653X User Manual

In Mac OS

Warning
devices. For example, do not configure two devices to have the same base address.
Note The PCI/PXI-7030/6533 configuration is similar to PCI/PXI-653X configuration
with a few exceptions. Refer to your PCI/PXI-7030
specific configuration details.
Note If you are using the AT-DIO-32HS device in a non-Plug and Play system, the device
automatically configures to a switchless DAQ device so it can work in the system.
© National Instruments Corporation
To create a virtual channel, or to learn about other capabilities of MAX,
read the MAX online help by selecting Help»Help Topics and select
NI-DAQ from the menu.
To view and test current resource allocation:
1. Open the NI-DAQ Configuration Utility.
2. Select the device you want to configure.
3. Click the Configure button.
4. Press the Test Resources button to test hardware resources.
Do not configure the 653X resources in conflict with non-National Instruments
Now that you have completed configuring your device, you can begin
setting up the device for use.
Chapter 1
d LabVIEW RT User Manual for
an
1-9
Getting Started with Your 653X
653X User Manual