Summary of Contents for National Instruments NI Vision PXI-1428
Page 1
(217) 352-9330 | Click HERE Find the National Instruments PCI-1428 at our website:...
Page 2
NI Vision NI PXI/PCI-1428 User Manual High-Quality Camera Link Image Acquisition Device for PXI and PCI NI PXI/PCI-1428 User Manual February 2007 372862E-01 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
Page 4
Instruments Corporation. National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
Page 5
These classes are known as Class A (for use in industrial-commercial locations only) or Class B (for use in residential or commercial locations). All National Instruments (NI) products are FCC Class A products. Depending on where it is operated, this Class A product could be subject to restrictions in the FCC rules. (In Canada, the Department of Communications (DOC), of Industry Canada, regulates wireless interference in much the same way.) Digital...
Page 6
Conventions The following conventions are used in this manual: <> Angle brackets that contain numbers separated by an ellipsis represent a range of values associated with a bit or signal name—for example, AO <3..0>. » The » symbol leads you through nested menu items and dialog box options to a final action.
Contents Chapter 1 Introduction Camera Link ........................1-2 Overview ......................1-2 Software Overview ......................1-2 NI-IMAQ Driver Software ................1-3 National Instruments Application Software ............1-3 Vision Builder for Automated Inspection.........1-3 Vision Development Module ............1-4 Integration with DAQ..................1-5 Vision and Motion...................1-5 Chapter 2 Hardware Overview Functional Overview......................2-1...
Page 8
Contents Appendix A Cabling Appendix B Technical Support and Professional Services Glossary Index NI PXI/PCI-1428 User Manual viii ni.com Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
I/O lines. For more advanced digital or analog system triggering or digital I/O lines, you can use the NI 1428 and NI-IMAQ with the National Instruments data acquisition (DAQ) or motion control product lines.
10 wires and over distances of up to 10 m. Software Overview Programming the NI 1428 requires the NI-IMAQ driver software for controlling the hardware. National Instruments also offers the following application software packages for analyzing and processing your acquired images. •...
National Instruments Application Software This section describes the National Instruments application software packages you can use to analyze and process the images you acquire with the NI 1428.
Chapter 1 Introduction Vision Builder AI allows you to easily configure and benchmark a sequence of visual inspection steps, as well as deploy the visual inspection system for automated inspection. With Vision Builder AI, you can perform powerful visual inspection tasks and make decisions based on the results of individual tasks.
Introduction Integration with DAQ Platforms that support NI-IMAQ also support NI-DAQ and a variety of National Instruments DAQ boards. This allows integration between image acquisition devices and National Instruments DAQ products. Vision and Motion Use National Instruments high-performance stepper and servo motion...
Chapter 2 Hardware Overview Camera Link and the NI 1428 The NI 1428 supports the Camera Link Base configuration as well as the 8-bit × 4 mode of the Camera Link Medium configuration. Base Configuration The Camera Link Base configuration places 24 data bits and four enable signals (Frame Valid, Line Valid, Data Valid, and a spare) on a single Channel Link part and cable.
Bus Master PCI Interface The NI 1428 implements the PCI interface with a National Instruments custom application-specific integrated circuit (ASIC), the PCI MITE. The PCI interface can transfer data at a theoretical maximum rate of 133 MB/s in bus master mode.
Page 19
NI 1428 serial port and are not required for most users. National Instruments also fully supports the recommended serial API described in the Specifications of the Camera Link Interface Standard for Digital Cameras and Frame Grabbers manual.
Chapter 3 Signal Connections MDR 26-Pin Connector The MDR 26-pin connector provides reliable high-frequency transfer rates between the camera and the acquisition device. To access this connector, use a 3M Camera Link cable. For additional information on Camera Link cables, including ordering information and cable lengths, refer to the Camera Link Cables section of Appendix A, Cabling.
Chapter 3 Signal Connections Connector Signal Connection Descriptions Table 3-1 describes the MDR-26 and 68-pin VHDCI signal connections. Table 3-1. I/O Connector Signals Signal Name Description TTL_TRIG<3..0> TTL external triggers/DIO lines (input/output) DGND A direct connection to digital GND on the NI 1428 CHASSIS_GND A direct connection to the computer chassis, which is grounded through the power cord...
Page 24
Camera Link cable ordering information. 68-Pin VHDCI Cable Specifications National Instruments offers cables and accessories for connecting to video sources, trigger sources, or synchronization sources. However, if you want to develop your own cable for the 68-pin VHDCI connector, you must use twisted pairs for each signal.
Page 26
MDR-26 male plugs linked with a twin-axial shielded cable and are available in two shell configurations. Note National Instruments recommends purchasing a Camera Link cable. Building your own cable is not recommended due to the high-speed signaling on the Camera Link interface.
Page 27
Camera Link cables are manufactured by 3M corporation and are available from both National Instruments and 3M. Two-meter Camera Link cables (part number 187676-02) are available from the National Instruments Web site at . Camera ni.com/catalog Link cables are available in 1 to 10 m lengths from the 3M Web site at .
Page 28
Technical Support and Professional Services Visit the following sections of the National Instruments Web site at for technical support and professional services: ni.com • Support—Online technical support resources at ni.com/support include the following: – Self-Help Resources—For answers and solutions, visit the...
Page 29
Appendix B Technical Support and Professional Services • Calibration Certificate—If your product supports calibration, you can obtain the calibration certificate for your product at ni.com/calibration If you searched and could not find the answers you need, contact ni.com your local office or NI corporate headquarters. Phone numbers for our worldwide offices are listed at the front of this manual.
Page 31
LVDS Low Voltage Differential Signaling (EIA-644). NI-IMAQ Driver software for National Instruments image acquisition hardware. NI PXI/PCI-1428 User Manual ni.com Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
Page 32
Region of interest. A hardware-programmable rectangular portion of the acquisition window. RTSI bus Real-Time System Integration Bus. The National Instruments timing bus that connects image acquisition and DAQ devices directly, by means of connectors on the devices, for precise synchronization of functions.
Page 33
Glossary A stream of pixels from a camera. Some cameras send multiple streams, or taps, of data over a cable simultaneously to increase transfer rate. transfer rate The rate, measured in bytes/s, at which data is moved from source to destination after software initialization and set up operations.