Setting Correct Date And Time; Clock Mode; Timer Mode - Cessna 1980 182Q Pilot's Operating Handbook And Flight Manual

2
PILOT'S OPERATING HANDBOOK
SUPPLEMENT
DIGITAL CLOCK
MODEL 182Q
LH Button: Sets date and
time of day (when used
with RH button).
Center Button: Alternately
displays clock or timer status
RH Button: Shows calendar
date momentarily; display
returns to clock mode after
1.5 Seconds.
Figure 2. Clock Mode
Minutes
Digits
(Until
59 min.
59 sec.
then
hours
digits)
Seconds
Digits
(Until
Timer
Mode
Indicator
59 min.
59 sec.
then min.
LH Button: Resets timer to
"zero".
Center Button: Alternately
displays clock or timer status
RH Button: Alternately starts
and stops timer; timer starts
from any previously accumu-
lated total.
Figure 3. Timer Mode
digits)
switch accessible through a small hole on the bottom of the
instrument case. Notice that in the 24-hour format, the
clock mode indicator does not appear.
SETTING CORRECT DATE AND TIME
The correct date and time are set while in the clock mode using the LH
and RH push buttons as follows: press the LH button once to cause the date
to appear with the month flashing. Press the RH button to cause the month
to advance at one per second (holding button), or one per push until the
correct month appears. Push the LH button again to cause the day of month
to appear flashing, then advance as before using RH button until correct
day of month appears.
Once set correctly, the date advances automatically at midnight e'ach
1 October 1979
3