Daikin FCQ35B7V1 Service Manual page 302

Disassembly and Maintenance
Step
1
Precaution during swing
motor insttallation
1 Engage the swing
motor-side gear with the
panel-side one.
(Otherwise, faulty
swinging operation or
abnormal noise may be
caused.)
Install the motor after
checking of correct gear
engagement.
3
2 Install the swing motor in
reverse process of
removal procedure.
3 After installing the swing
motor, be sure to turn on
the power switch for
resetting (for initializing
the vane positions).
5 5
5–52
Procedure
Motor-side gear
Panel-side gear
Points
(S2649)
When install the decoration
panel, be careful not to catch
the lead wire.
Part 5 – Disassembly and Maintenance
ESIE05-04