High Land; Light Source Mode; Cooling Fast - Eiki EK-130U Owner's Manual

High land

Enable to control the fan through the Setting menu.
You can select the running speed of the fan
according to the altitude of the location where the
projector is installed.
Off
Normal speed. Set it so if the projector is operated at
a lower altitude.
On
Faster than Off. Set it so if the projector is operated at
a higher altitude as fans will produce weaker effects.
Note:
Please set High land "On" when operating the projector higher than 1400-2000 meters.

Light source mode

Change the brightness of the screen.
Boost(100%) .......Normal brightness.
Normal(75%)........Lower-brightness, reducing the
ECO1(50%) .........Middle brightness, reducing the
ECO2(25%) ........ Lowest brightness, reducing the

Cooling fast

This function provides the following options in
the cooling fans' operation after turning off the
projector.
Normal
Normal cooling speed.
60 sec
Faster and lounder than Normal, cooling
time is shorter.
0 sec
Enable you directly unplug the AC power
cord after turning off the projector, no need
waiting for cooling.
Note:
When it is set to "0 sec", you cannot restart the projector immediately after the power-off. The
lamp remains high temperature and needs to be cooled, so it takes longer time than
usual for the lamp to light up again.
lamp power consumption and
extending the lamp life.
lamp power consumption and
extending the lamp life.
lamp power consumption and
extending the lamp life.
Setting
High land
Light source mode
Cooling fast
Setting
Direct power on
Standby mode
High land
Light source mode
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Setting
Direct power on
Standby mode
High land
Light source mode
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Setting
Direct power on
Standby mode
High land
Light source mode
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
Off
Eco
Off
Normal
Off
On
Off
Eco
Off
Normal
Off
On
45