High Land; Lamp Control; Cooling Fast - Eiki EK-120 Series Owner's Manual

High land

Enable to control the fan through the Setting
menu.
You can select the running speed of the fan
according to the altitude of the location where
the projector is installed.
Off
Normal speed. Set it so if the projector is
operated at a lower altitude.
On
Faster than Off. Set it so if the projector is
operated at a higher altitude as fans will produce
weaker effects.
Note:
Please set High land "On" when operating the
projector higher than 1400 meters.

Lamp control

Change the brightness of the screen.
Normal .... Normal brightness.
Eco .......... Lower brightness, reducing
power consumption and
extending the lamp life.

Cooling fast

This function provides the following options in
the cooling fans' operation after turning off the
projector.
Normal (90 sec)
Normal cooling speed.
60 sec
Faster and lounder than Normal, cooling time
is shorter.
0 sec
Enable you directly unplug the AC power cord
after turning off the projector, no need waiting for
cooling.
Note:
When it is set to "0 sec", you cannot restart the projector immediately after the power-off. The
lamp remains high temperature and needs to be cooled, so it takes longer time than
usual for the lamp to light up again.
38
Setting
High land
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Lamp control
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Cooling fast
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
Off
Eco
Off
Normal
Off
On
Off
Eco
Off
Normal
Off
On