Backup Configuration Settings - D-Link DWC-1000 User Manual

Section 9 - Maintenance
Path: Maintenance > Firmware > Backup/Restore
After you configure the wireless controller as desired, back up the configuration settings. When you back up the
settings, they are saved as a file. You can then use the file to restore the settings on the same wireless controller if
something goes wrong or on a different wireless controller that will replace or work with other wireless controllers.
1. Click Maintenance > Firmware > Backup/Restore.
2. Click Save from System (PC), Save from USB Port 1, or Save from USB Port 2, depending on the
location the backup should be saved to.
A. If Save from System (PC) is chosen, a dialog box message will appear. Afterwards the browser will
automatically begin the download to the default download location.
B. If Save from USB Port 1, or Save from USB Port 2 is chosen, the file will immediately be backed up
to the corresponding USB flash drive without further prompts. If no USB flash medium is present,
these options will do nothing.
D-Link DWC-1000 User Manual

Backup Configuration settings

332