Viewing Access Point Information; Global Status - D-Link DWC-1000 User Manual

Section 8 - Viewing Status and Statistics
Path: Status > Wireless Information > Access Point > Global Status
The AP Global Status page shows summary information about managed, failed, and rogue access points the
wireless controller has discovered or detected.
Field
total APs
Managed APs
standalone APs
rogue APs
Discovered APs
Connection Failed APs
Authentication Failed APs
D-Link DWC-1000 User Manual

Viewing Access Point information

Global status

Total number of Managed APs in the database. This value is always equal to
the sum of Managed Access Points, Connection Failed Access Points, and
Discovered Access Points.
Number of APs in the managed AP database that are authenticated,
configured, and have an active connection with the Wireless controller.
Number of trusted APs in Standalone mode. APs in Standalone mode are not
managed by a controller.
Number of Rogue APs currently detected on the WLAN. When an AP performs
an RF scan, it might detect access points that have not been validated. It
reports these APs as rogues.
APs that have a connection with the controller, but haven't been completely
configured. This value includes all managed APs with a Discovered or
Authenticated status.
Number of APs that were previously authenticated and managed, but
currently don't have connection with the Wireless controller.
Number of APs that failed to establish communication with the FASTPATH
Unified Wireless controller.
Description
293