Option 2/Dmz Settings - D-Link DWC-1000 User Manual

Section 5 - Advanced Network Configuration
Path: Network > Internet > Option 2 / DMZ Setting
The wireless controller allows an Option port to be configured as a secondary Ethernet port or dedicated
Demilitarized Zone (DMZ) port. A DMZ allows one IP address (computer) to be exposed to the Internet for
activities such as Internet gaming and video conferencing.
If you want to set up the Option 2 port to connect to the Internet, select Option next to Configurable Port and
refer to the Option 1 Port Settings on the previous three pages.
Configuring DMZ settings is a 2-step process:
1. Configure the wireless controller port to act as a DMZ, and
2. Configure the DMZ settings for the port
To configure a port to operate as a DMZ:
1. Go to Network > Internet > Option 2 / DMZ Setting.
2. Next to Configurable Port, select DMZ.
3. Enter the IP address and the subnet mask of the computer/device you want to configure DMZ to.
4. Under DHCP for DMZ, select either None, DHCP Server (and enter the primary and secondary DNS
Server addresses), or DHCP Relay.
5. Click Save.
D-Link DWC-1000 User Manual

option 2/DMZ settings

137