Configure Ap Profile Radio - D-Link DWC-1000 User Manual

Hide thumbs Also See for DWC-1000:
Table of Contents

Advertisement

Section 4 - Advanced WLAN Configuration

Configure AP Profile radio

Path: Wireless > Access Point > AP Profile > AP Profile Radio
To accommodate a broad range of wireless clients and wireless network requirements, the AP can support up to
two radios. By default, Radio 1 operates in the IEEE 802.11a/n mode, and Radio 2 operates in the IEEE 802.11b/g/n
mode. The difference between these modes is the frequency in which they operate. IEEE 802.11b/g/n operates in
the 2.4 GHz frequency, and IEEE 802.11a/n operates in the 5 GHz frequency of the radio spectrum.
1. Click Wireless > Access Point > AP Profiles > AP Profiles Radio tab.
2. Right-click on the radio you want to change and click Edit.
D-Link DWC-1000 User Manual
90

Advertisement

Table of Contents
loading

Table of Contents