Viewing Wds Link Status - D-Link DWC-1000 User Manual

Section 8 - Viewing Status and Statistics
Path: Status > Wireless Information > WDS Groups Status> WDS Link Status
The WDS AP Link Status page displays summary information about the link configuration and link state in a WDS
group.
Field
iD
source AP MAC
source AP radio
Destination AP MAC
Destination AP radio
source AP end-Point
Destination AP end-Point
Aggregation Mode
source AP stP
Destination AP stP
D-Link DWC-1000 User Manual

Viewing WDs link status

The group number that identifies the configured WDS AP group.
The MAC address of one end-point of the WDS link.
The radio number of the WDS link endpoint on the source AP.
The MAC address of the Source AP in the group.
The radio number of the WDS link endpoint on the destination AP.
Indicates whether the AP specified by the destination MAC detected the AP
specified by the source MAC.
Indicates whether the AP specified by the source MAC detected the AP
specified by the destination MAC.
When parallel links are defined between two APs, this field indicates whether
this link is part of the aggregation link pair.
Spanning Tree State of the link on the source AP, which is one of the following:
• Disabled (STP is disable or Link is down)
• Forwarding
• Learning
• Listening
• Blocking
Spanning Tree State of the link on the destination AP, which is one of the
following:
• Disabled (STP is disable or Link is down)
• Forwarding
• Learning
• Listening
• Blocking
Description
318