Step #6: Confirm Access Point Profile Is Associated - D-Link DWC-1000 User Manual

Section 3 - Basic Configuration

step #6: Confirm Access Point Profile is Associated

Use the following procedure to confirm that the access point profile is associated with the wireless controller.
Note: Each time you change configuration settings, perform this procedure to apply the changes to the access point.
1. Go to Wireless > Access Point > AP Profile.
2. Under Access Point Profile List, right-click on the AP profile you want to update and click Apply.
3. Wait 30 seconds and then click the refresh icon
access point is configured and ready to authenticate wireless users.
D-Link DWC-1000 User Manual
to verify that the profile is associated. Your associated
39