Section 9 - Maintenance
1. Go to Maintenance > Management > SNMP> SNMP System Info tab.
2. Enter the information as desired.
• SysContact: The name of the contact person for this controller. Examples: admin, John Doe.
• SysLocation: The physical location of the controller: Example: Rack #2, 4th Floor.
• SysName: A name given for easy identification of the controller.
3. Click Save.
If you use Simple Network Management Protocol (SNMP) to manage the controller, you can configure the SNMP
agent on the controller to send traps to the SNMP manager on your network from this page.
When an AP is managed by a controller, it does not send out any traps. The controller generates all SNMP traps
based on its own events and the events it learns about through updates from the APs it manages.
All Wireless SNMP traps are disabled by default.
1. Go to Maintenance > Management > SNMP > SNMP Trap tab.
D-Link DWC-1000 User Manual
Configure snMP system info
Configure Wireless snMP info
329