Channel Plan And Power Settings; Configure Channel Plan - D-Link DWC-1000 User Manual

Section 4 - Advanced WLAN Configuration

Channel Plan and Power settings

The wireless controller software contains a channel plan algorithm that automatically determines which RF
channels each AP should use to minimize RF interference. When you enable the channel plan algorithm, the
wireless controller periodically evaluates the operational channel on every AP it manages and changes the
channel if the current channel is noisy.
Path: Wireless > General > Channel Algorithm
To configure Channel Algorithm setting:
1. Click Wireless > General > Channel Algorithm > Channel Setting tab. The Channel Setting page will
appear.
2. Each AP is dual‐band capable of operating in the 2.4GHz and 5GHz frequencies. The 802.11a/n and
802.11b/g/n modes use different channel plans. Before you configure channel plan settings, select the
mode to configure. Click either the 5GHz or 2.4GHz tab.
D-Link DWC-1000 User Manual

Configure Channel Plan

67