Mac Based Vlans - D-Link DWC-1000 User Manual

Section 5 - Advanced Network Configuration
Path: Network > VLAN > Advanced VLAN > MAC Based VLAN
If a packet is untagged or priority tagged, the device shall associate it with the VLAN which corresponds to the
source MAC address in its MAC‐based VLAN tables. If there is no matching entry in the table, then the packet is
subject to normal VLAN classification rules of the device.
Use the MAC‐based V LAN Configuration page to map a MAC entry to the V LAN table. After the source MAC address
and the VLAN ID are specified, the MAC‐to‐VLAN configurations are shared across all ports of the controller.
1. Go to Network > VLAN > Advanced VLAN > MAC Based VLAN tab.
2. Toggle Activate MAC-based VLAN to ON and click Save.
3. Click Add New MAC Based VLAN.
D-Link DWC-1000 User Manual

MAC Based VlAns

156