D-Link DWC-1000 User Manual page 139

Section 5 - Advanced Network Configuration
Field
Connection type
DHCPv6 Auto Configuration
Prefix Delegation
iPv6 Address
iPv6 Prefix length
Default iPv6 Gateway
Dns server(s)
User name
Password
service
Authentication type
DHCPv6 options
Dns server(s)
D-Link DWC-1000 User Manual
Select the type of your IPv6 Internet connection (DHCPv6, Static, or PPPoE).
Select one of the following:
• Stateless Address Auto Configuration: this option will use router advertisement for address assignment.
The IPv6 RADVD protocol will be enabled to advertise this controller as a DHCPv6 client.
• Stateful Address Auto Configuration: select this option to request an IPv6 address from any available
DHCPv6 servers available on the ISP.
Toggle to ON to request router advertisement prefix from any available DHCPv6 servers available from your
ISP, the obtained prefix is updated to the advertised prefixes on the LAN side.
Enter the static IPv6 address that your ISP assigned to you. This address will identify the router to your ISP.
The IPv6 network (subnet) is identified by the initial bits of the address called the prefix. All hosts in the
network have the identical initial bits for their IPv6 address; the number of common initial bits in the networks
addresses is set by the prefix length field.
IPv6 address of the ISPs gateway. This is usually provided by the ISP or your network administrator.
Enter the primary and secondary DNS server IP address(es).
Enter your PPPoE user name.
Enter your PPPoE password.
Use this field if you need to distinguish two servers using the same Username and Password combination.
With PPP, as you can't specify servers using IP address, you can specify the particular server to connect to using
this field.
Select the type of Authentication to use (Auto-Negotiate, PAP, CHAP, MS-CHAP, or MS-CHAPv2).
The mode of Dhcpv6 client that will start in this mode : disable dhcpv6/stateless dhcpv6/stateful dhcpv6/
stateless dhcpv6 with prefix delegation.
Enter the primary and secondary DNS server IP address(es).
Description
DHCPv6
static
PPPoe
139