D-Link DWR-980 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DWR-980
  6. User manual

D-Link DWR-980 User Manual

Wireless ac1200 4g lte router with vdsl2 support, gigabit ethernet ports, and 2 fxs ports
Hide thumbs Also See for DWR-980:
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
DWR-980
Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
December 2018

Advertisement

Table of Contents
loading

Related Manuals for D-Link DWR-980

Summary of Contents for D-Link DWR-980

  • Page 1 User Manual DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports December 2018...

  • Page 2: Table Of Contents

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports User Manual Contents Chapter 1. Introduction..........5 Contents and Audience............5 Conventions..............5 Document Structure............5 Chapter 2. Overview..........6 General Information............6 Specifications..............8 Product Appearance............14 Front Panel..............14 Left Side Panel............16 Back Panel...............17...
  • Page 3 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports User Manual Statistics..............63 Network Statistics............63 DHCP..............64 Routing Table............65 Clients..............66 Multicast Groups............67 Clients and Session............68 DSL Status...............69 Connections Setup............70 WAN..............70 Creating Dynamic IPv4, Static IPv4, or IPoA WAN Connection.....72 Creating Dynamic IPv6 or Static IPv6 WAN Connection....81...
  • Page 4 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports User Manual Advanced..............175 Interface Grouping............176 WAN Remapping............178 DNS..............179 DDNS..............181 Redirect..............183 Routing..............184 TR-069 Client............186 Remote Access............188 UPnP IGD..............190 xDSL..............191 IGMP..............192 ALG/Passthrough............193 IPsec..............195 VoIP..............201 Basic Settings............201 Advanced..............204...

  • Page 5: Chapter 1. Introduction

    Chapter 2 gives an overview of the router's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the router DWR-980 and configure a PC in order to access its web-based interface. Chapter 4 describes all pages of the web-based interface in detail.

  • Page 6: Chapter 2. Overview

    150Mbps and uplink speeds of up to 50Mbps. Also you are able to connect the wireless router DWR-980 to a VDSL line or to a private Ethernet line and use a high-speed Internet connection to successfully fulfill a wide range of professional tasks.
  • Page 7 Also DWR-980 supports configuration and management via mobile application for Android smartphones. You can simply update the firmware: the router itself finds approved firmware on D-Link update server and notifies when ready to install it. Page 7 of 266...

  • Page 8: Specifications

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Overview User Manual Specifications Hardware Processor · RTL8685PB (1GHz) · 128MB, DDR2, built in processor Flash · 128 МБ, Serial NAND Interfaces · Slot for SIM card (mini-SIM) ·...
  • Page 9 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Overview User Manual Software · WAN connection types · PPPoE / IPv6 PPPoE / PPPoE Dual Stack / PPPоA · Static IP / Dynamic IP / IPoA ·...
  • Page 10 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Overview User Manual LTE Module Parameters · LTE connection rate Downlink: up to 150Mbps · Uplink: up to 50Mbps Supported frequencies · Power Class 3 ·...
  • Page 11 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Overview User Manual Wireless Module Parameters · Standards IEEE 802.11a/n/ac · IEEE 802.11b/g/n Frequency range · 2400 ~ 2483.5MHz · 5150 ~ 5350MHz ·...
  • Page 12 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Overview User Manual Phone · General SIP Features Individual account per port · Invite with Challenge · Register by IP address or domain name of SIP server ·...
  • Page 13 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Overview User Manual Physical Parameters Dimensions (L x W x H) · 220 x 67 x 195 mm (8.7 x 2.6 x 7.7 in) Weight ·...

  • Page 14: Product Appearance

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Overview User Manual Product Appearance Front Panel Figure 1. Front panel view. Mode Description Poor signal strength. Fair signal strength. Good signal strength. Solid green Very good signal strength.
  • Page 15 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Overview User Manual Mode Description Line 1 is registered on the SIP server. Solid green Attempting to register line 1 on the SIP server.

  • Page 16: Left Side Panel

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Overview User Manual Left Side Panel Figure 2. Left side panel view. Name Description A button to quickly add wireless devices to the router's WLAN (the WPS function).

  • Page 17: Back Panel

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Overview User Manual Back Panel Figure 3. Back panel view. Port Description A button to restore the factory default settings. RESET To restore the factory defaults, push the button (with the device turned on), hold it for 10 seconds, and then release the button.

  • Page 18: Delivery Package

    • “Quick Installation Guide” (brochure). • The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.

  • Page 19: Chapter 3. Installation And Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual CHAPTER 3. INSTALLATION AND CONNECTION Before You Begin Please, read this manual prior to installing the device. Make sure that you have all the necessary information and equipment.

  • Page 20: Connecting To Pc

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual Connecting to PC PC with Ethernet Adapter 1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.

  • Page 21: Obtaining Ip Address Automatically (Os Windows 7)

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual Obtaining IP Address Automatically (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window.
  • Page 22 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line. Figure 5. The Network and Sharing Center window.
  • Page 23 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
  • Page 24 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.
  • Page 25 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.

  • Page 26: Pc With Wi-Fi Adapter

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual PC with Wi-Fi Adapter 1. To connect via built-in modem: insert a SIM card into the slot on the left side panel of the router with the gold contacts facing towards the front of the device and gently push until it clicks.

  • Page 27: Windows 7)

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual Obtaining Address Automatically Connecting to Wireless Network (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window.
  • Page 28 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
  • Page 29 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DWR-980 (for operating in the 2.4GHz band) or DWR-980-5G (for operating in the 5GHz band) and click the Connect button. Figure 12. The list of available networks.

  • Page 30: Connecting To Web-Based Interface

    (create a WAN connection, change the parameters of the wireless network, specify the settings of the firewall, etc.). For security reasons, DWR-980 with default settings cannot connect to the Internet. To get started, please set your own password used to access the web-based interface and, if needed, configure other settings recommended by your ISP.
  • Page 31 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.

  • Page 32: Web-Based Interface Structure

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual Web-based Interface Structure Summary Page On the Summary page, detailed information on the device state is displayed. Figure 16. The summary page.
  • Page 33 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual In the WAN section, data on the type and status of the existing WAN connection are displayed. In the LAN section, the IPv4 and IPv6 address of the router and the number of wired and wireless clients of the device are displayed.

  • Page 34: Home Page

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual Home Page The Home page displays links to the most frequently used pages with device's settings. Figure 17. The Home page.

  • Page 35: Menu Sections

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual Menu Sections To configure the router use the menu in the left part of the page. In the Initial Configuration section you can run the Initial Configuration Wizard. The Wizard...

  • Page 36: Notifications

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Installation and Connection User Manual Notifications The router's web-based interface displays notifications in the top right part of the page. Figure 18. The web-based interface notifications.

  • Page 37: Chapter 4. Configuring Via Web-Based Interface

    If you perform initial configuration of the router via Wi-Fi connection, please make sure that you are connected to the wireless network of DWR-980 (see the WLAN name (SSID) on the barcode label on the back panel of the device) and click the NEXT button.
  • Page 38 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual You can finish the wizard earlier and go to the menu of the web-based interface. To do this, click the ADVANCED SETTINGS button.

  • Page 39: Selecting Operation Mode

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Selecting Operation Mode In order to connect your device to a wired ISP, on the Device mode page, from the Connection method list, select the Ethernet (WAN) value.
  • Page 40 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In order to connect your device to the network of a 3G or LTE operator, on the Device mode page, from the Connection method list, select the 3G/LTE modem value.
  • Page 41 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In order to connect your device to a private Ethernet line, on the Device mode page, from the Connection method list, select the Ethernet (LAN) value.

  • Page 42: Creating Lte Wan Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Creating LTE WAN Connection This configuration step is available for the 3G/LTE modem mode. 1. If the PIN code check is enabled for the SIM card inserted into the built-in modem, enter the PIN code in the PIN field and click the APPLY button.

  • Page 43: Wi-Fi Client

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Wi-Fi Client This configuration step is available for the Wi-Fi mode. 1. On the Wi-Fi Сlient page, click the WIRELESS NETWORKS button and select the network to which you want to connect in the opened window.
  • Page 44 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Encryption key WEP as Select the checkbox to set a hexadecimal number as a key for encryption.

  • Page 45: Configuring Lan Port As Wan Port

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Configuring LAN Port as WAN Port This configuration step is available for the Ethernet (LAN) mode. 1. On the Device connection page, select a free LAN port which will be used as the WAN port.

  • Page 46: Creating Wired Wan Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Creating Wired WAN Connection This configuration step is available for the ADSL, VDSL, Ethernet (WAN), Ethernet (LAN), and Wi-Fi modes.

  • Page 47: Static Ipv4 Or Ipoa Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Static IPv4 or IPoA Connection Figure 33. The page for configuring Static IPv4 WAN connection. The IPoA connection type is available for the ADSL mode only.

  • Page 48: Static Ipv6 Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Static IPv6 Connection Figure 34. The page for configuring Static IPv6 WAN connection. Fill in the following fields: IP address, Prefix, Gateway IP address, and DNS IP address.

  • Page 49: Dual Access) Connections

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual PPPoE, PPPoA, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access) Connections Figure 35. The page for configuring PPPoE WAN connection.

  • Page 50: Pppoe + Static Ip (Pppoe Dual Access) Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual PPPoE + Static IP (PPPoE Dual Access) Connection Figure 36. The page for configuring PPPoE + Static IP (PPPoE Dual Access) WAN connection.

  • Page 51: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 37. The page for configuring PPTP + Dynamic IP WAN connection.

  • Page 52: Pptp + Static Ip Or L2Tp + Static Ip Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual PPTP + Static IP or L2TP + Static IP Connection Figure 38. The page for configuring PPTP + Static IP WAN connection.

  • Page 53: Configuring Wireless Network

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Configuring Wireless Network 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network in the 2.4GHz band or leave the value suggested by the...
  • Page 54 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual 4. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz band, select the Enable guest network checkbox.

  • Page 55: Configuring Lan Ports For Iptv/Voip

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Configuring LAN Ports for IPTV/VoIP This configuration step is available for the ADSL, VDSL, Ethernet (WAN), Ethernet (LAN), and Wi-Fi modes.
  • Page 56 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual 6. On the VoIP page, select the Is an IP phone connected to the device checkbox. Figure 42. The page for selecting a LAN port to connect a VoIP phone.

  • Page 57: Changing Web-Based Interface Password

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Changing Web-based Interface Password On this page, you should change the default administrator password. To do this, enter a new password in the Admin password and Password confirmation fields.
  • Page 58 If problems of connection have not been solved, contact the technical support of your ISP (as a rule, the technical support phone is provided with the agreement) or the D-Link technical support (the phone number is displayed on the Summary page).

  • Page 59: Connection Of Multimedia Devices

    IPTV set-top box or IP phone. Contact your ISP to clarify if you need to configure DWR-980 in order to use these devices. To start the Wizard, on the Home page, select the Connection of Multimedia Devices section.
  • Page 60 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the WAN section, click the Add icon Figure 46. Adding a connection. You can specify the following parameters:...
  • Page 61 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description for applications that allow various delays and losses of packets. The Peak Cell Rate is a determining factor in how often cells are sent in an effort to minimize lag or jitter caused by traffic inconsistencies.
  • Page 62 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual To deselect the port or wireless interface, select the No value from the Bridged with drop-down list of the element corresponding to the needed LAN port or interface. Then in the WAN section, select the connection which will not be used any longer and click the REMOVE button.

  • Page 63: Statistics

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Statistics The pages of this section display data on the current state of the router: network statistics •...

  • Page 64: Dhcp

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual DHCP The Statistics / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as well as the IP address expiration periods (the lease time).

  • Page 65: Routing Table

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Routing Table The Statistics / Routing Table page displays the information on routes. The table contains destination IP addresses, gateways, subnet masks, and other data.

  • Page 66: Clients

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Clients On the Statistics / Clients page, you can view the list of devices connected to the local network of the router.

  • Page 67: Multicast Groups

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Multicast Groups The Statistics / Multicast Groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.

  • Page 68: Clients And Session

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Clients and Session On the Statistics / Clients and Session page, you can view information on current sessions in the router's network.

  • Page 69: Dsl Status

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual DSL Status The information shown on the Statistics / DSL Status page can be used for troubleshooting and diagnosing connection problems.

  • Page 70: Connections Setup

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Connections Setup In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection).
  • Page 71 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual To remove a connection, in the Connections List section, select the checkbox located to the left of the relevant line in the table and click the DELETE button ( ).

  • Page 72: Creating Dynamic Ipv4, Static Ipv4, Or Ipoa Wan Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Creating Dynamic IPv4, Static IPv4, or IPoA WAN Connection To create a connection of the Dynamic IPv4, Static IPv4 or IPoA type, click the ADD button ( on the Connections Setup / WAN page in the Connections List section.
  • Page 73 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The Ethernet section is displayed for Ethernet WAN connections. Figure 56. The page for creating a new Static IPv4 connection. The Ethernet section.
  • Page 74 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The PTM section is displayed for VDSL WAN connections. Figure 57. The page for creating a new Static IPv4 connection. The PTM section.
  • Page 75 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The ATM section is displayed for ADSL WAN connections. Figure 58. The page for creating a new Static IPv4 connection. The ATM section.
  • Page 76 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description libraries). When you select this value from the drop-down list, the Peak Cell Rate field is displayed. Specify a required value (in cells per second).
  • Page 77 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The Authorization via 802.1x Protocol section is displayed for the Dynamic IPv4 and Static IPv4 types. Figure 59. The page for creating a new Static IPv4 connection. The Authorization via 802.1x Protocol section.
  • Page 78 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 60. The page for creating a new Static IPv4 connection. The IPv4 section. Parameter Description IPv4 For Static IPv4 and IPoA types IP Address Enter an IP address for this WAN connection.
  • Page 79 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 61. The page for creating a new Static IPv4 connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, the network address translation function is enabled.
  • Page 80 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The VLAN section is displayed for the Dynamic IPv4 and Static IPv4 types. Figure 62. The page for creating a new Static IPv4 connection. The VLAN section.

  • Page 81: Creating Dynamic Ipv6 Or Static Ipv6 Wan Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Creating Dynamic IPv6 or Static IPv6 WAN Connection To create a connection of the Dynamic IPv6 or Static IPv6 type, click the ADD button ( ) on the Connections Setup / WAN page in the Connections List section.
  • Page 82 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The Ethernet section is displayed for Ethernet WAN connections. Figure 64. The page for creating a new Static IPv6 connection. The Ethernet section.
  • Page 83 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The PTM section is displayed for VDSL WAN connections. Figure 65. The page for creating a new Static IPv6 connection. The PTM section.
  • Page 84 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The ATM section is displayed for ADSL WAN connections. Figure 66. The page for creating a new Static IPv6 connection. The ATM section.
  • Page 85 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description libraries). When you select this value from the drop-down list, the Peak Cell Rate field is displayed. Specify a required value (in cells per second).
  • Page 86 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 67. The page for creating a new Static IPv6 connection. The IPv6 section. Parameter Description IPv6 For Static IPv6 type IPv6 address Enter an IPv6 address for this WAN connection.
  • Page 87 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Primary IPv6 DNS Enter addresses of the primary and secondary IPv6 DNS servers in server/Secondary IPv6 the relevant fields.
  • Page 88 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 69. The page for creating a new Static IPv6 connection. The VLAN section. Parameter Description VLAN Move the switch to the right to allow the router to use tagged VLAN Use VLAN connections.

  • Page 89: Creating Pppoe Or Pppoa Wan Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Creating PPPoE or PPPoA WAN Connection To create a connection of the PPPoE or PPPoA type, click the ADD button ( ) on the Connections Setup / WAN page in the Connections List section.
  • Page 90 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The Ethernet section is displayed for Ethernet WAN connections. Figure 71. The page for creating a new PPPoE connection. The Ethernet section.
  • Page 91 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The PTM section is displayed for VDSL WAN connections. Figure 72. The page for creating a new PPPoE connection. The PTM section.
  • Page 92 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The ATM section is displayed for ADSL WAN connections. Figure 73. The page for creating a new PPPoE connection. The ATM section.
  • Page 93 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description libraries). When you select this value from the drop-down list, the Peak Cell Rate field is displayed. Specify a required value (in cells per second).
  • Page 94 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 74. The page for creating a new PPPoE connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
  • Page 95 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right if you want the router to keep you connected to your ISP even when the connection has been inactive Keep Alive for a specified period of time.
  • Page 96 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 75. The page for creating a new PPPoE connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, the network address translation function is enabled.
  • Page 97 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The VLAN section is displayed for the PPPoE type. Figure 76. The page for creating a new PPPoE connection. The VLAN section.

  • Page 98: Creating Pptp Or L2Tp Wan Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Creating PPTP or L2TP WAN Connection To create a connection of the PPTP or L2TP type, click the ADD button ( ) on the Connections Setup / WAN page in the Connections List section.
  • Page 99 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 78. The page for creating a new PPTP connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
  • Page 100 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied. • MPPE 40/128 bit: MPPE encryption with a 40-bit or 128- •...
  • Page 101 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 79. The page for creating a new PPTP connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, the network address translation function is enabled.

  • Page 102: Creating Pppoe Ipv6 Or Pppoe Dual Stack Wan Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection To create a connection of the PPPoE IPv6 or PPPoE Dual Stack type, click the ADD button ( on the Connections Setup / WAN page in the Connections List section.
  • Page 103 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The Ethernet section is displayed for Ethernet WAN connections. Figure 81. The page for creating a new PPPoE IPv6 connection. The Ethernet section.
  • Page 104 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The PTM section is displayed for VDSL WAN connections. Figure 82. The page for creating a new PPPoE IPv6 connection. The PTM section.
  • Page 105 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The ATM section is displayed for ADSL WAN connections. Figure 83. The page for creating a new PPPoE IPv6 connection. The ATM section.
  • Page 106 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description libraries). When you select this value from the drop-down list, the Peak Cell Rate field is displayed. Specify a required value (in cells per second).
  • Page 107 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 84. The page for creating a new PPPoE IPv6 connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
  • Page 108 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right if you want the router to keep you connected to your ISP even when the connection has been inactive Keep Alive for a specified period of time.
  • Page 109 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 85. The page for creating a new PPPoE Pv6 connection. The IP section. Parameter Description Select a method for IPv6 address assignment from the drop-down Get IPv6 list or leave the Automatically value.
  • Page 110 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 86. The page for creating a new PPPoE IPv6 connection. The Miscellaneous section. Parameter Description Miscellaneous For the PPPoE Dual Stack type only.
  • Page 111 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 87. The page for creating a new PPPoE IPv6 connection. The VLAN section. Parameter Description VLAN Move the switch to the right to allow the router to use tagged VLAN Use VLAN connections.

  • Page 112: Creating Bridge Wan Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Creating Bridge WAN Connection To create a connection of the Bridge type, click the ADD button ( ) on the Connections Setup / WAN page in the Connections List section.
  • Page 113 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The Ethernet section is displayed for Ethernet WAN connections. Figure 89. The page for creating a new Bridge connection. The Ethernet section.
  • Page 114 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The PTM section is displayed for VDSL WAN connections. Figure 90. The page for creating a new Bridge connection. The PTM section.
  • Page 115 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The ATM section is displayed for ADSL WAN connections. Figure 91. The page for creating a new Bridge connection. The ATM section.
  • Page 116 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description libraries). When you select this value from the drop-down list, the Peak Cell Rate field is displayed. Specify a required value (in cells per second).
  • Page 117 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 92. The page for creating a new Bridge connection. The VLAN section. Parameter Description VLAN Move the switch to the right to allow the router to use tagged VLAN Use VLAN connections.

  • Page 118: Creating Lte Wan Connection

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Creating LTE WAN Connection If the PIN code check is enabled for the SIM card inserted into the built-in modem, then prior to creating an LTE WAN connection, go to the LTE Modem menu and enter the PIN code on the page displayed (see the LTE Modem section, page 169).
  • Page 119 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 94. The page for creating a new LTE connection. The LTE Modem section. Parameter Description LTE Modem The value of the field specifies the type of the network to which the router connects.
  • Page 120 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 95. The page for creating a new LTE connection. The IPv4 section. Parameter Description IPv4 Obtain DNS server...
  • Page 121 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 96. The page for creating a new LTE connection. The Health Check section. Parameter Description Health Check The Health Check function allows the router to constantly check the LTE connection status by checking availability of a remote host.
  • Page 122 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 97. The page for creating a new LTE connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, the network address translation function is enabled.

  • Page 123: Lan

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual To configure the router's local interface, go to the Connections Setup / LAN page. IPv4 Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MAC address and IP address pairs.
  • Page 124 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 99. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section. Parameter Description Dynamic IP Addresses An operating mode of the router's DHCP server.
  • Page 125 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description The IP address of the external DHCP server which assigns IP addresses to the router's clients.

  • Page 126: Ipv6

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual IPv6 Go to the IPv6 tab to change IPv6 address of the router and configure IPv6 addresses assignment settings.
  • Page 127 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 102. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section. Parameter Description Dynamic IPv6 Addresses Select the needed value from the drop-down list.
  • Page 128 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the Static IP Addresses section, you can specify MAC address and IPv6 address pairs (set a fixed IPv6 address in the local area network for a device with a certain MAC address). The router...

  • Page 129: Wan Reservation

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual WAN Reservation On the Connections Setup / WAN Reservation page, you can enable the WAN backup function, which provides you with uninterrupted access to the Internet. When your main connection breaks down, the router activates the backup connection;...
  • Page 130 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description A number of requests that will be sent in order to analyze the status Number of inspections...

  • Page 131: Wi-Fi

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network. Basic Settings In the Wi-Fi / Basic settings section, you can change basic parameters for the wireless interface of the router and configure the basic and additional wireless networks.
  • Page 132 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the General Settings section, the following parameters are available: Parameter Description To enable Wi-Fi connection, move the switch to the right.
  • Page 133 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual To edit the settings of the basic wireless network, in the Wi-Fi Network section, change the needed parameters and click the APPLY button.
  • Page 134 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Wi-Fi Network A name for the wireless network. The name can consist of digits and Network name (SSID) Latin characters.
  • Page 135 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the Security Settings section, you can change security settings of the wireless network. By default, the WPA2-PSK network authentication type of both bands of the wireless network is specified.
  • Page 136 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual When the Open or WEP value is selected, the following settings are displayed on the page (unavailable for the wireless network operating modes which support the standard 802.11n or 802.11ac):...
  • Page 137 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed value is selected, the following fields are displayed on the page: Figure 109.
  • Page 138 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the following settings are displayed on the page: Figure 110.

  • Page 139: Client Management

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Client Management On the Wi-Fi / Client Management page, you can view the list of wireless clients connected to the router.

  • Page 140: Wps

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a method for connection to the WLAN.
  • Page 141 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual When the WPS function is enabled, the Information section is available on the page. Parameter Description The state of the WPS function: Configured (all needed settings are specified;...

  • Page 142: Using Wps Function Via Web-Based Interface

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Using WPS Function via Web-based Interface To connect to the basic wireless network via the PIN method of the WPS function, follow the next steps: 1.

  • Page 143: Using Wps Function Without Web-Based Interface

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Using WPS Function without Web-based Interface You can use the WPS function without accessing the web-based interface of the router. To do this, you need to configure the following router's settings: 1.

  • Page 144: Wmm

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
  • Page 145 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual To edit the parameters of an Access Category, left-click the relevant line. In the opened window, change the needed parameters.
  • Page 146 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Acknowledgment. Answering response requests while transmitting. Displayed only in the Access Point section. If the switch is moved to the left, the router answers requests.

  • Page 147: Client

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point or to a WISP.
  • Page 148 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the Wireless Networks section, the list of available wireless networks is displayed. To view the latest data on available wireless networks, click the UPDATE LIST button.
  • Page 149 An encryption method: TKIP, AES, or TKIP+AES. When you have configured the parameters, click the APPLY button. When connecting to a wireless access point, the wireless channel of DWR-980 will switch to the channel of the access point to which you have connected.

  • Page 150: Additional

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Additional On page of the Wi-Fi / Additional section, you can define additional parameters for the WLAN of the router.
  • Page 151 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The following fields are available on the page: Parameter Description The channel bandwidth for 802.11n standard in the 2.4GHz band (the 2.4GHz tab).
  • Page 152 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to disable multicasting for the router's Drop multicast WLAN. Move the switch to the left to enable multicasting from the WAN connection selected on the Advanced / IGMP page.

  • Page 153: Mac Filter

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual MAC Filter On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
  • Page 154 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 118. The window for adding a rule for the MAC filter. You can specify the following parameters:...
  • Page 155 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual To open the basic or additional wireless network for the devices which MAC addresses are specified on this page and to close the wireless network for all other devices, in the section corresponding to the band (2.4 GHz or 5 GHz), left-click the line of the wireless network.

  • Page 156: Print Server

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Print Server On the Print Server page, you can configure the router as a print server. Being configured in this way, the router will allow your LAN users to share the printer connected to the USB port of the router.

  • Page 157: Usb Storage

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual USB Storage This menu is designed to operate USB storages. Here you can do the following: view data on the connected USB storage •...

  • Page 158: Usb Users

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual USB Users On the USB Storage / USB Users page, you can create user accounts to provide access to data on the USB storage connected to the router.

  • Page 159: Samba

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Samba On the USB Storage / Samba page, you can enable the built-in Samba server of the router to provide access to the USB storage for users of your LAN.
  • Page 160 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual To allow access only to a certain folder of the USB storage, click the ADD ( ) button in the Directories section.

  • Page 161: Ftp

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual On the USB Storage / FTP page, you can enable the built-in FTP server of the router to provide access to the USB storage for users of your LAN.

  • Page 162: Filebrowser

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Filebrowser On the USB Storage / Filebrowser page, you can view the content of your USB storage connected to the router and remove separate folders and files from the USB storage.

  • Page 163: Dlna

    USB storage, or leave the value specified by default (900). In the DLNA server name field, specify a name of the DLNA server which will be displayed for users of your LAN or leave the value specified by default (D-Link DLNA Server). Use digits and/or Latin characters.
  • Page 164 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 128. Specifying a media folder. In the opened window, locate a folder containing files. To do this, click the Search icon ( ) in the Path field.

  • Page 165: Torrent Client

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Torrent Client On the USB Storage / Torrent Client page, you can configure all needed settings for the built-in Transmission client.
  • Page 166 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right if you want to limit the number of simultaneous downloads. Upon that the Download queue size field will be displayed.
  • Page 167 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 130. The web-based interface of the Transmission torrent client. Using the web-based interface of the built-in Transmission torrent client you can manage the process of downloading files to the USB storage connected to the router.
  • Page 168 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Click the button to restart all downloads. If you limited the maximum number of simultaneous downloads, the Transmission client starts processing of the specified number of torrent files;...

  • Page 169: Lte Modem

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual LTE Modem This menu is designed to operate the built-in LTE modem. If the PIN code check for the SIM card inserted into the built-in modem is not disabled, the relevant notification will be displayed in the top right corner of the page.

  • Page 170: Basic Settings

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Basic Settings On the LTE Modem / Basic Settings page, you can view data on the built-in modem and enable/disable the function for automatic creation of LTE WAN connection.

  • Page 171: Pin

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual On the LTE Modem / PIN page, you can change the PIN code of the SIM card inserted into the built-in modem, disable or enable the check of the PIN code.
  • Page 172 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 135. The LTE Modem / PIN page. The PUK code request. For further use of the card, in the Authorization section, enter the PUK code in the relevant field, and then specify a new PIN code for your SIM card in the New PIN code and New PIN code confirmation field.

  • Page 173: Sms

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual When a new text message is received, the relevant notification will be displayed in the top right corner of the page.
  • Page 174 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the SMS section, you can create and send a text message. In the Number field, enter the recipient's phone number.

  • Page 175: Advanced

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Advanced In this menu you can configure advanced settings of the router: define interface groups • allow the router to connect to a private Ethernet line •...

  • Page 176: Interface Grouping

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Interface Grouping On the Advanced / Interface Grouping page, you can create groups consisting of interfaces and ports of the router, for example, for distinguishing different types of traffic. Such a function is mostly used in Triple-play networks.
  • Page 177 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual On the opened page, you can specify the following parameters: Parameter Description A name for the group for easier identification. You can specify any Name name.

  • Page 178: Wan Remapping

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual WAN Remapping On the Advanced / WAN Remapping page, you can configure the router to connect to a private Ethernet line.

  • Page 179: Dns

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual On the Advanced / DNS page, you can add DNS servers to the system. Figure 141. The Advanced / DNS page.
  • Page 180 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual If needed, you can add your own address resource record. To do this, click the ADD button ( ) in the Hosts section.

  • Page 181: Ddns

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses.
  • Page 182 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Hostname The full domain name registered at your DDNS provider.

  • Page 183: Redirect

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Redirect On the Advanced / Redirect page, you can enable notifications on the reason of the Internet connection failure. Notifications will be displayed in the browser window when a user is attempting to open a web site on the Internet.

  • Page 184: Routing

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Routing On the Advanced / Routing page, you can specify static (fixed) routes. Figure 146. The Advanced / Routing page.
  • Page 185 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Protocol An IP version. From the drop-down list, select an interface (connection) through which the device will communicate with the remote network.

  • Page 186: Tr-069 Client

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual TR-069 Client On the Advanced / TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS).
  • Page 187 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Auto Configuration Server Settings URL address The URL address of the ACS provided by the ISP.

  • Page 188: Remote Access

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Remote Access On the Advanced / Remote Access page, you can configure access to the web-based interface of the router. By default, the access from external networks to the router is closed. If you need to allow access to the router from the external network, create relevant rules.
  • Page 189 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description A name for the rule for easier identification. You can specify any Name name.

  • Page 190: Upnp Igd

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual UPnP IGD On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The router uses the UPnP IGD protocol for automatic configuration of its parameters for network applications requiring an incoming connection to the router.

  • Page 191: Xdsl

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual xDSL The Advanced / xDSL page includes the set of ADSL and VDSL standards that should be defined by an ISP.

  • Page 192: Igmp

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual IGMP On the Advanced / IGMP page, you can allow the router to use IGMP. IGMP is used for managing multicast traffic (transferring data to a group of destinations). This protocol allows using network resources for some applications, e.g., for streaming video, more...

  • Page 193: Alg/Passthrough

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual ALG/Passthrough On the Advanced / ALG/Passthrough page, you can allow the router to use RTSP, enable the SIP ALG and PPPoE/PPTP/L2TP/IPsec pass through functions.
  • Page 194 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The following elements are available on the page: Parameter Description Move the switch to the right to enable SIP. Such a setting allows using the SIP ALG function.

  • Page 195: Ipsec

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual IPsec On the Advanced / IPsec page, you can configure VPN tunnels based on IPsec protocol. IPsec is a protocol suite for securing IP communications.
  • Page 196 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual To create a new tunnel, click the ADD button ( ) in the Tunnels section. Setting for both devices which establish the tunnel should be the same.
  • Page 197 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Identifier value Specify the local host identifier. Pre-shared key A key for mutual authentication of the parties.
  • Page 198 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Maximum Segment Size of a TCP packet. This parameter influences the size of a TCP packet which will be sent from a remote host to the router.
  • Page 199 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 157. The page for adding an IPsec tunnel. The First Phase / The Second Phase sections. Parameter...
  • Page 200 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description The lifetime of IPsec-SA keys in seconds. After the specified period it IPsec-SA lifetime is required to renegotiate the keys. Specify 0 if you don't want to limit the lifetime of the keys.

  • Page 201: Voip

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual VoIP In this menu you can configure all parameters essential for VoIP via SIP and specify all needed settings for the phone connected to the router.
  • Page 202 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description A port of the SIP outbound proxy server. Unless another setting is given by your ISP, it is recommended to leave the default value Port (5060).
  • Page 203 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 160. The VoIP / Basic Settings page. The SIP Lines section. Parameter Description SIP Lines Line 1, Line 2...

  • Page 204: Advanced

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Advanced On the VoIP / Advanced settings page, you can specify additional settings for VoIP via SIP. Figure 161. The VoIP / Advanced page.
  • Page 205 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Select a data type from the drop-down list. The list is displayed if the Payload type RFC2833 value is selected from the DTMF relay setting drop- down list.
  • Page 206 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Registration Registration expire A time period (in seconds) after which the router changes the timeout registration status in case of no response from the SIP proxy server.
  • Page 207 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Jitter Buffer The Jitter Buffer parameter improves the quality of voice transmission: received voice packets are specially delayed, which...
  • Page 208 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to enable the Symmetric Response Routing function in accordance with RFC3581. This function allows...

  • Page 209: Sip Lines

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual SIP Lines On the VoIP / SIP Lines page, you can specify incoming/outgoing call settings for the SIP line.
  • Page 210 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Fill in the field to allow the user of the phone to make calls only PIN code to dial after dialing the PIN code.
  • Page 211 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to use combination of the FLASH key and number keys of the phone in order to organize three-party calls or transfer calls.
  • Page 212 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description A time period (in seconds) between lifting up the receiver and Connect after dialing the hotline number. The field is available for editing if the Enable hotline switch is moved to the right.

  • Page 213: Fax Settings

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Fax Settings On the VoIP / Fax Settings page, you can specify settings of data receipt/transfer for the fax machines connected to the FXS ports of the router.
  • Page 214 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to let the router support operation with Support SoftX3000 SoftX3000. If the switch is moved to the right, the Port field is unavailable for editing.

  • Page 215: Audio Settings

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Audio Settings On the VoIP / Audio settings page, you can configure audio parameters, volume and voice codecs.
  • Page 216 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Line Echo Cancellation. Move the switch to the right to enable the function. Nonlinear Processing. Move the switch to the right to enable the function.
  • Page 217 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the Codecs Settings section, you can configure work of voice codecs in use. Figure 165. The VoIP / Audio Settings page. The Codecs Settings section.

  • Page 218: Routing Call

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Click the SAVE button. When all needed settings are configured, click the APPLY button. Routing Call On the VoIP / Routing Call page, you can fill in the phone book for a devices connected to the FXS ports of the router.
  • Page 219 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the Abbreviated Dial section, you can assign short numbers (as a rule, such numbers consist of two or three digits) to frequently used phone numbers. To do this, click the ADD button ( ).

  • Page 220: Call Feature Codes

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Call Feature Codes On the VoIP / Call Feature Codes page, you can allow changing some parameters of the router directly from the phone sets connected to the FXS ports of the router.
  • Page 221 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Also the following call feature codes are available on the page: Parameter Description Disable Call Waiting Disables the call waiting function.
  • Page 222 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual To change parameters of a code, select the relevant line in the table. Figure 169. The VoIP / Call Feature Codes page. The window for editing the code parameters.

  • Page 223: Call Logging

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Call Logging On the VoIP / Call Logging page, you can configure the call log parameters, sending the log and conversation records to a USB storage connected to the router and view information on all calls.
  • Page 224 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to activate the DES (Data Encryption Standard) encryption algorithm in the CBC (Cipher Block Chaining) Encrypt audio files mode.

  • Page 225: Text Messages

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Text Messages On the VoIP / Text Messages page, you can send text messages to other VoIP devices and also view the message history.
  • Page 226 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual To sort the message history, in the Message History section, left-click the name of a column and click the Sort icon ( (ascending), (descending)) displayed.

  • Page 227: Security

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Security On the VoIP / Security page, you can configure filtering rules for incoming calls of the phones connected to the FXS ports of the router.

  • Page 228: Alarm Clock

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Alarm Clock On the VoIP / Alarm Clock page, you can configure the phones connected to the FXS ports of the router as alarm clocks.

  • Page 229: Firewall

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Firewall In this menu you can configure the firewall of the router: add rules for IP filtering •...
  • Page 230 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 175. The page for adding a rule for IP filtering. You can specify the following parameters: Parameter...
  • Page 231 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description A protocol for network packet transmission. Select a value from the Protocol drop-down list. An IP version to which the rule will be applied. Select the relevant IP version value from the drop-down list.
  • Page 232 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Set source port Move the switch to the right to specify a port of the source IP manually address manually.

  • Page 233: Virtual Servers

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Virtual Servers On the Firewall / Virtual Servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
  • Page 234 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 177. The page for adding a virtual server. Page 234 of 266...
  • Page 235 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description General Settings A name for the virtual server for easier identification. You can Name specify any name.
  • Page 236 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description A port of the IP address specified in the Private IP field to which traffic is directed from the Public port. Specify the start and the Private port (start)/ end value for the port range.

  • Page 237: Dmz

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks. In the router, the DMZ implements the capability to transfer a request coming to a port of the router from the external network to a specified host of the internal network.

  • Page 238: Mac Filter

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual MAC Filter On the Firewall / MAC Filter page, you can configure MAC-address-based filtering for computers of the router's LAN.
  • Page 239 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the rule.

  • Page 240: Url Filter

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual URL Filter On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites.

  • Page 241: System

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual System In this menu you can do the following: change the password used to access the router's settings •...

  • Page 242: Configuration

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Configuration On the System / Configuration page, you can change the password for the administrator account used to access the web-based interface of the router and to access the device settings via TELNET,...
  • Page 243 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual The following buttons are also available on the page: Control Description Click the button to restore the factory default settings. Also you can...

  • Page 244: Firmware Update

    To enable the automatic check for firmware updates, in the Remote Update section, move the Check for updates automatically switch to the right and click the APPLY SETTINGS button. By default, in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is specified.

  • Page 245: Local Update

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Local Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown.

  • Page 246: Remote Update

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Remote Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown.

  • Page 247: Log

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual On the System / Log page, you can set the system log options and configure sending the system log to a remote host.
  • Page 248 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Parameter Description Logging Select a type of logging from the drop-down list. Local: the system log is stored in the router's memory. When •...
  • Page 249 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual To disable logging of the system events, move the Enable switch to the left and click the APPLY button.

  • Page 250: Ping

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility.
  • Page 251 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual After specifying the additional parameters, click the OK button. To run the check, click the START button. After a while, the results will be displayed on the page.

  • Page 252: Traceroute

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Traceroute On the System / Traceroute page, you can determine the route of data transfer to a host via the traceroute utility.
  • Page 253 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Specify the TTL (Time to live) parameter value. The default value is...

  • Page 254: Telnet

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Telnet On the System / Telnet page, you can enable or disable access to the device settings via TELNET from your LAN.

  • Page 255: System Time

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual System Time On the System / System Time page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.
  • Page 256 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual In some cases NTP servers addresses are provided by your ISP. In this case, you need to move the Get NTP server addresses using DHCP switch in the NTP Settings section to the right and click the APPLY button.

  • Page 257: Yandex.dns

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Yandex.DNS This menu is designed to configure the Yandex.DNS service. Yandex.DNS is a web content filtering service which provides the DNS server, protects a computer against malicious web sites, and blocks access to adult web sites.
  • Page 258 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual When the service is enabled, the Default Mode section is displayed on the page. Select the needed choice of the radio button to configure filtering for all devices of the router's network: Protection off: when this value is selected, the service provides the DNS server with no •...

  • Page 259: Devices And Rules

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Devices and Rules On the Yandex.DNS / Devices and Rules page, you can specify a filtering mode for each device separately.
  • Page 260 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual Figure 194. Adding a new rule for the Yandex.DNS service. In the opened window, you can specify the following parameters:...
  • Page 261 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Configuring via Web-based Interface User Manual To edit a rule for filtering, select a relevant line of the table, in the opened window, change the needed values and click the SAVE button.

  • Page 262: Chapter 5. Operation Guidelines

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Operation Guidelines User Manual CHAPTER 5. OPERATION GUIDELINES Safety Rules and Conditions Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged.

  • Page 263: Wireless Installation Considerations

    RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DWR-980 device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3- 90 feet (1-30 meters).

  • Page 264: Chapter 6. Abbreviations And Acronyms

    DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Abbreviations and Acronyms User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Third Generation Access Category Advanced Encryption Standard Address Resolution Protocol BSSID Basic Service Set Identifier...
  • Page 265 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Abbreviations and Acronyms User Manual Network Address Translation Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing Push Button Configuration Personal Identification Number PPPoE Point-to-point protocol over Ethernet...
  • Page 266 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports Abbreviations and Acronyms User Manual WLAN Wireless Local Area Network Wi-Fi Multimedia Wi-Fi Protected Access Wi-Fi Protected Setup Page 266 of 266...

Table of Contents