Current Logs - D-Link DWC-1000 User Manual

Section 10 - Troubleshooting

Current logs

Path: Status > System Information > All Logs > Current Logs
The Display Logs window allows you to view configured log messages from the controller as they appear. Each
log will appear with a timestamp as determined by the controller's configured time. If remote logging such
as a Syslog server or e-mail logging is configured, the same logs are sent to the remote interface while being
displayed here.
Click Refresh to refresh logs or reload page again.
Click Clear All to remove all entries in the Display Logs screen.
Click Send Logs to send all logs in the Display Logs screen to preconfigured e-mail recipients.
D-Link DWC-1000 User Manual 356