Configure Radius Accounting Global Setting - D-Link DWC-1000 User Manual

Section 6 - Securing Your Network

Configure rADiUs Accounting Global setting

Path: Security > Authentication > External Auth Server > RADIUS Server
This page is used to view and configure various global parameters for the RADIUS Accounting server configured
on the system. Use Accounting Mode to enable/disable accounting globally for configured SSID's.
To configure the global settings:
1. Go to Security > Authentication > External Auth Server > RADIUS Accounting Global Setting tab.
2. Complete the information from the table below and click Save.
Field
Accounting Mode
Accounting interim Update
Mode
rADiUs Accounting interim
interval
D-Link DWC-1000 User Manual
Toggle to ON to enable accounting mode.
Toggle to ON to send Radius Accounting (Interim-Update) based on Interim Interval
Period. By default this mode is disabled.
The interim Interval at which Radius Accounting (Interim-Update) packets should be
sent by the controller. The value should be in the range 300 - 3600.
Description
219