Conducting A System Check - D-Link DWC-1000 User Manual

Section 10 - Troubleshooting
Path: Maintenance > Management > Diagnostics > System Check
As part of the diagnostics functions on the wireless controller, you can ping an IP address. You can use this
function to test connectivity between the wireless controller and another device on the network connected to
the wireless controller.
1. Go to Maintenance > Management > Diagnostics > System Check.
2. Click Display IPv4 Table or Display IPv6 Table. The results will appear in the Command Output display
below.
D-Link DWC-1000 User Manual

Conducting a system Check

347