Viewing Wds Ap Status - D-Link DWC-1000 User Manual

Section 8 - Viewing Status and Statistics
Path: Status > Wireless Information > WDS Groups Status > WDS AP Status
The WDS AP Group Status page displays summary information about the APs in a configured WDS group.
Field
Group iD
AP MAC Address
AP Connection status
satellite Mode
stP root Mode
root Path Cost
ethernet Port stP state
ethernet Port Mode
ethernet Port link state
D-Link DWC-1000 User Manual

Viewing WDs AP status

Use the drop-down menu above the fields to select the group number that
identifies the configured WDS AP group.
Identifies the AP in the group by its MAC address.
Indicates whether the AP is currently being managed by one of the controllers
in the cluster.
Indicates whether the AP is a Satellite AP connected to the network via a WDS
link or a Root AP connected to the network via a wired link.
Indicates whether this AP is the root of the spanning tree. If spanning tree is
disabled then the AP is always reported as Not STP Root.
Spanning Tree Path Cost to the root. The root AP always reports this value as 0.
If spanning tree is disabled the value is also 0.
When spanning tree is enabled on the APs in the WDS group this status
parameter reports the spanning tree status of the Ethernet port.
On Satellite APs the Ethernet port can be manually disabled. On root APs the
port is always enabled.
When the Ethernet port is enabled, this status reports the link state of the port.
Description
317