Editing/Deleting Static Routes - D-Link DWC-1000 User Manual

Section 5 - Advanced Network Configuration
3. Complete the fields in the table below and click Save.
Field
route name
Active
Private
iPv6 Destination
iPv6 Prefix length
interface
iPv6 Gateway
Metric
After you add static routes, you can edit it if you need to change settings. To edit a static route, right-click the
static route you want to edit and click Edit.
To delete a static route, right-click the static route you want to remove and click Delete.
D-Link DWC-1000 User Manual
Enter a unique name for this static route. The name should allow you to easily identify
this static route from others you may add.
Activates or deactivates the status route. Choices are:
• ON = activate static route.
• OFF = deactivate static route.
Designates the static route as private. Choices are:
• ON = static route is private.
• OFF = static route is not private.
The wireless controller will lead to this destination host or IP address.
The number of prefix bits in the IPv6 address that define the subnet.
Select the wireless controller interface that will interface to the static route. Choices are:
• Option 1/ Option 2 = the wireless controller's Option port will interface to the static
route.
• LAN = the wireless controller's LAN or VLAN port will interface to the static route.
• Sit0 Tunnel
IP Address of the gateway through which the destination host or network can be
reached.
Determines the priority of the route. If multiple routes to the same destination exist, the
route with the lowest metric is chosen.

editing/Deleting static routes

Description
165