Peer Controller Sent Status - D-Link DWC-1000 User Manual

Section 8 - Viewing Status and Statistics
Path: Status > Wireless Information > Controller Status > Peer Controller Sent Status
You can push portion of the controller configuration from one controller to another controller in the cluster. The
Peer Controller Sent Status page display information about the configuration sent by a peer controller in the
cluster. It also identifies the IP address of each peer controller that receive the configuration information.
Field
Peer Controller iP Address
Configuration Controller iP Address
Configuration
timestamp
D-Link DWC-1000 User Manual

Peer Controller sent status

Shows the IP address of each peer wireless controller in the cluster that
received configuration information.
Shows the IP Address of the controller that sent the configuration information.
Identifies which parts of the configuration the controller received from the
peer controller.
Shows when the configuration was applied to the controller. The time is
displayed as UTC time and therefore only useful if the administrator has
configured each peer controller to use NTP.
Description
292