Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
Connecting to Mobile Device with D-Link Assistant Application
1. Connect the power cord to the power connector port on the back panel of the router, then
plug the power adapter into an electrical outlet or power strip.
2. Make sure that the Wi-Fi connection on your mobile device is on. To switch it on, go to the
mobile device settings.
3. In the list of available wireless networks on your mobile device, select the wireless network
DWR-980 (for operating in the 2.4GHz band) or DWR-980-5G (for operating in the
5GHz band).
4. In the opened window, enter the network key (see WPS PIN on the barcode label on the
back panel of the device) as the password and connect to the wireless network of DWR-980.
5. Launch D-Link Assistant application on your mobile device. The application is available for
Android smartphones in Google Play.
6. Make sure that the application correctly identified the router to which you connect.
7. In the application interface, select the Advanced Settings menu option to go through the
Initial Configuration Wizard or finish the Wizard earlier and go the configuration menu (for
the description of the configuration pages, see the relevant section of the Configuring via
Web-based Interface chapter).
As you perform initial configuration of the router via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the router you will need to
reconfigure the wireless connection using the newly specified settings.
If you changed the administrator password via the web-based interface, when DWR-980 is
accessed with the application the next time, click the ENTER LOGIN/PASSWORD button.
Enter the username (admin) and the password you specified.
D-Link Assistant for Android
Page 25 of 372
Installation and Connection
Advertisement
Table of Contents
