D-Link DWM-312 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DWM-312
  6. User manual

D-Link DWM-312 User Manual

4g lte m2m router
Hide thumbs Also See for DWM-312:
Table of Contents

Advertisement

Quick Links

Version 1.00 | 05/16/2017

User Manual

4G LTE M2M Router
DWM-312

Advertisement

Table of Contents
loading

Related Manuals for D-Link DWM-312

Summary of Contents for D-Link DWM-312

  • Page 1: User Manual

    Version 1.00 | 05/16/2017 User Manual 4G LTE M2M Router DWM-312...

  • Page 2: Manual Revisions

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 1.00 May 16, 2017 • Initial release...

  • Page 3: Table Of Contents

    Network Status ...............11 GRE ...................37 APN Settings ..............12 Advanced ..................38 APN Configuration ............13 DNS ..................38 Connection Settings .............15 DNS ..................38 SIM Card Settings ............16 DNS Redirect..............39 IPv4 and IPv6 info ............17 Firewall ...................40 Device Mode ..............18 D-Link DWM-312 User Manual...
  • Page 4 Remote Login Settings .............53 Configuration Backup ..........54 SMS ..................55 SMS Inbox .................55 Compose SMS ..............56 Message Settings ............57 Time Settings ...............59 Firmware Upgrade ..............60 Device Upgrade ..............60 Module Upgrade ............61 System Log ................62 Schedules ................63 Add New Rule ..............63 D-Link DWM-312 User Manual...

  • Page 5: Product Overview

    Section 1 - Product Overview Product Overview Package Contents DWM-312 4G LTE M2M Router Power Adapter 2x 3G/4G Antennas RJ-45 Cable If any of the above items are missing or damaged, please contact your reseller. System Requirements • A compatible micro-SIM/UICC card with service.* •...

  • Page 6: Introduction

    Machine-to-Machine (M2M) applications. Powerful VPN tools and advanced remote management combined with ease of use make the DWM-312 ideal for both large-scale and individual deployments. Easily connect to your high-speed 3G/4G LTE mobile connection with the DWM-312 4G LTE M2M Router, and enjoy fast downlink speeds of up to 150 Mbps...

  • Page 7: Hardware Overview

    This is a standard 10/100 Mbps Ethernet port to connect any device via Cat 5/5e/6 RJ-45 cables. Ethernet Port Ethernet Activity Flashes green when there is Ethernet traffic. 5.5 mm barrel connector for power. DC Power Input D-Link DWM-312 User Manual...

  • Page 8: Top Panel

    SMA female connector - Auxiliary Antenna. Wall Mounts Wall mounts for standard 8 gauge (4 mm) screws. Power A green LED indicates the DWM-312 is receiving power. Internet A green LED indicates Internet connectivity. Solid Green Connected to SIM A LTE Network.

  • Page 9: Rear Panel

    SMA Connector AUX SMA female connector - Auxiliary Antenna. SIM A Primary SIM card slot. Reset Press and hold for 3 seconds to reset. SIM B Secondary SIM card. SMA Connector Main SMA female connector - Primary antenna. D-Link DWM-312 User Manual...

  • Page 10: Installation

    Observe the following precautions to help prevent shutdowns, equipment failures, and personal injury: • Install the DWM-312 in a cool and dry place. Refer to the technical specifications in the user manual for the acceptable operating temperature and humidity ranges.

  • Page 11: Attaching The External Antennas

    Section 2 - Installation Attaching the External Antennas The DWM-312 requires two external antennas to function correctly. The included antennas are interchangeable, but third party antennas may require connection to specific ports. 1. Attach the antennas to the SMA connectors labelled “Main” and “Aux” on the back of the router Turn clockwise to fasten the antenna.

  • Page 12: Installing The Sim Card(S)

    Section 2 - Installation Installing the SIM card(s) The DWM-312 is equipped with dual-SIM slots. At least one active SIM card with Internet access is required for proper operation. 1. Insert a micro-SIM card into the slot labelled SIM A with the contacts facing down.

  • Page 13: Configuration

    At the top of the page is a menu. Clicking on one of these icons will take you to the appropriate configuration section. On each page, fill out the desired settings and click Apply when you are done or Refresh to revert to the old settings. D-Link DWM-312 User Manual...

  • Page 14: Internet

    On this page you can configure your Internet connection. If you are not sure which settings to use, please contact your Internet Service Provider (ISP). Note that the DWM-312 requires a SIM card and active cellular internet service to connect to the Internet.

  • Page 15: Sima/Simb

    Shows whether the router is assigned an IPv4 or an IPv6 address. Total DL: Shows total downloaded bytes since last reboot. Total UL: Shows total uploaded bytes since last reboot. Profile Name: Indicates the name of the APN profile. Click Refresh to update the page. D-Link DWM-312 User Manual...

  • Page 16: Apn Settings

    Fill in if provided by your ISP. If not, keep the default value Server: (optional). Secondary DNS Fill in if provided by your ISP. If not, keep the default value Server: (optional). Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 17: Apn Configuration

    APN Profile on page 13. Add New APN: Click Add New APN to create a new APN, described in New/Edit APN Profile on page 13. Click Delete to all profiles selected in the Item column. Delete: D-Link DWM-312 User Manual...
  • Page 18 Enter a priority between 1 and 4, with 1 being highest priority and Priority: 4 being lowest. Authentication: Select the authentication type used by your ISP. Click Save to save your settings, or Undo to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 19: Connection Settings

    Section 4 - Configuration Connection Settings Prefer Service Choose whether the DWM-312 should only use 4G networks, 3G Type: networks, 2G networks, or use Auto Mode to automatically select a network. Allow Data Enabling this option will allow you to connect when roaming Roaming: outside your carrier’s home coverage.

  • Page 20: Sim Card Settings

    PUK code provided by the ISP. For information on the configuration of your SIM card, consult your ISP or carrier. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 21: Ipv4 And Ipv6 Info

    Shows the gateway used by the current SIM card. DNS Server1: Indicates the IP address of the primary DNS server. DNS Server2: Indicates the IP address of the primary DNS server. Click Refresh to update this page. D-Link DWM-312 User Manual...

  • Page 22: Device Mode

    Device Mode: Router Mode is the default mode, which enables NAT and DCHP. In this configuration, the DWM-312 gets an IP from the ISP, and then creates its own subnet with a private IP range. Bridge Mode disables all DHCP, NAT, and routing functions. In this mode, the DWM-312 acts as a simple modem, and IPs are assigned directly by the ISP.

  • Page 23: Router Mode

    In addition to the options available for Target1, you can also Target 2: select None to use only the host selected in Target1. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 24: Lan

    Click this to configure the Router Information Protocol (RIP), described on the following page. LAN Snooping: Click this to toggle LAN snooping, described on the following page. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 25: Dynamic Route

    Click Save to save your settings, or the X button to revert to your previous settings. LAN Snooping: Check Enable to enable LAN snooping. Click Save to save your settings, or the X button to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 26: Dhcp

    DHCP The DWM-312 has a built-in DHCP (Dynamic Host Configuration Protocol) server. The DHCP server assigns IP addresses to devices on the network that request them. By default, the DHCP server is enabled on the device. The DHCP address pool contains a range of IP addresses, which are automatically assigned to the clients on the network.

  • Page 27: Ipv6

    Section 4 - Configuration IPv6 IPv6 Config IPv6: Select Enable to enable IPv6, otherwise select Disable. IPv6 settings are configured on the next page. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 28: Internet Connection Type

    Section 4 - Configuration Internet Connection Type The DWM-312 supports both SLAAC and DHCP IPv6 configuration options. Which one is used will depend on your serivce provider and network configuration. LAN Assigned Select DHCPv6, SLAAC+Stateless DHCP or SLAAC+RDNSS. Type: If you selected DHCPv6, the following options will appear: IPv6 Address Enter the starting IPv6 address for the DHCP server’s IPv6...

  • Page 29: Vpn

    Section 4 - Configuration The DWM-312 supports a number of virtual private network (VPN) protocols. VPNs are used to create virtual private tunnels to remote VPN gateways. The tunnel technology supports data confidentiality, data origin authentication, and data integrity of network information by utilizing encapsulation protocols, encryption algorithms, and hashing algorithms.
  • Page 30 Check this box to enable aggressive mode. Preshare Key: Enter an ASCII passphrase in the box. Local ID: Choose from Username, FQDN, User@FQDN, or Key ID using the drop-down menu and then enter an ID in the box. D-Link DWM-312 User Manual...
  • Page 31 IPSEC Proposal Use this area to Enable IPSec Proposals. Then choose the Settings: Encryption and Authentication types from the drop-down menus. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 32: Xauth Account

    Enter an XAUTH username for users to connect to your IPSec server. Password: Enter a password corresponding to the username for users to connect to your IPSec server. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 33: Pptp

    Section 4 - Configuration PPTP PPTP Server Server Seup: Check this box to enable the DWM-312’s internal PPTP server. If enabled, the following options will appear: Authentication Select one or more authetication types for the server, either PAP, Type: CHAP, MS_CHAP, or MS_CHAP2. Note that PAP and CHAP are not compatible with encryption.

  • Page 34: Pptp Server

    Virtual IP: The client’s IP address within the virtual network. Peer Call ID: Used to identify and associate a tunnel with a packet. Operation: Click Disconnect to disconnect a specific client. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 35: Pptp Client

    Enter the route to which to bind the VPN tunnel. Connect: Select On Demand, Auto, or Manual. Option: Check the appropriate boxes to support Microsoft Point-to-Point Encryption (MPPE) and Network Address Translation (NAT). Enable: Check this box to enable the VPN client. D-Link DWM-312 User Manual...
  • Page 36 Virtual IP: Lists the IP assigned by the tunnel. Remote IP: Lists the IP of the VPN server. Status: Displays the current connection status of the VPN tunnel. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 37: L2Tp

    Section 4 - Configuration L2TP L2TP Server Server Setup: Check this box to enable the DWM-312’s internal L2TP server. If enabled, the following options will appear: Authentication Select one or more authentication types for the server, either PAP, Type: CHAP, MS_CHAP, or MS_CHAP2. Note that PAP and CHAP are not compatible with encryption.
  • Page 38 Virtual IP: The client’s IP address within the virtual network. Peer Call ID: Used to identify and associate a tunnel with a packt. Operation: Click Disconnect to disconnect a specific client. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 39: L2Tp Client

    Enter the route to which to bind the the VPN tunnel. Connect: Select On Demand, Auto, or Manual. Option: Check the appropriate boxes to support Microsoft Point-to-Point Encryption (MPPE) and Network Address Translation (NAT) Enable: Check this box to enable the VPN client. D-Link DWM-312 User Manual...
  • Page 40 Virtual IP: Lists the IP assigned by the tunnel. Remote IP: Lists the IP of the VPN server. Status: Displays the current connection status of the VPN tunnel. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 41: Gre

    Transmitted Bytes: Displays the number of bytes sent. Received Packets: Displays the number of packets received. Received Bytes: Displays the number of bytes received. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 42: Advanced

    Enter the Host Name that you registered with your DDNS service provider. Username / Enter the Username for your DDNS account. E-mail: Password / Key: Enter the Password for your DDNS account. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 43: Dns Redirect

    Enter the IP that should be returned whenever a DNS request is Address: sent to the router. All URLs queried through the router’s DNS will redirect to the same location. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 44: Firewall

    Previous Page: Click to go back to the previous filter page. Next Page: Click to advance to the next filter page. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 45: Inbound Filter

    Previous Page: Go back to the previous filter page. Next Page: Advance to the next filter page. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 46: Url Filter

    Enter a URL that you would like to block. All URLs that begin with this string will be blocked. Enable: Check the box to enable the specified rule. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 47: Mac Address Filter

    Specify the MAC address of the computer to be filtered. If this box is ticked, the rule will follow the connection control setting specified in MAC filtering settings specified above. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 48: Dmz

    IP address automatically using DHCP, be sure to make a static reservation on the Setup > Network Settings page so that the IP address of the DMZ machine does not change. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 49: Qos

    Specify the schedule rule number. To create a new schedule, click on the Add New Rule button. For more information about schedules, please refer to Schedules on page 45. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 50: Snmp

    SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network device to the administrator of the network. SNMP can be used to monitor traffic and statistics of the DWM-312. The DWM-312 supports SNMP v1, v2c, and v3.
  • Page 51 Check Enable to activate the user account. Uncheck to disable the Enable: user account. Click Edit to make changes to the corresponding account. Actions: Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 52: Virtual Server

    Specify the schedule rule number. To create schedules, click on the Add New Rule button. For further information on schedules, please refer to Schedules on page 48. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 53: Upnp

    Check the box to enable the Universal Plug and Play (UPnP™) feature. UPNP provides compatibility with various networking equipment, software, and peripherals. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 54: Network Scan

    Section 4 - Configuration Network Scan This page lets you set whether to allow the DWM-312 to automatically select a 3G/4G network based on the inserted SIM card, or allows you to manually scan for networks and select one to connect to.

  • Page 55: Email Settings

    Enter a subject for the e-mail. Email Log Now: Click this button to send the current logs to the specified e-mail address. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 56: System

    Old Password: Enter the current admin password. New Password: Enter the new admin password. Confirm Password: Reenter the new password to confirm. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 57: Remote Login Settings

    Enable Remote Tick this check box to enable remote management. Remote Management: management allows the DWM-312 to be configured over the Internet through a web browser. A username and password will still be required to access the web-management interface. IP Allowed to...

  • Page 58: Configuration Backup

    Upload Settings button to upload the settings to the router. Restore To Factory This option will restore all settings back to their defaults. Any Default Settings: settings that have not been backed up will be lost, including any rules that you have created. D-Link DWM-312 User Manual...

  • Page 59: Sms

    Opens a Create Message window to reply to the selected SMS message. Forward: Opens a Create Message windows to forward the selected SMS message to another recipient. Refresh: Click this button to check for new messages. D-Link DWM-312 User Manual...

  • Page 60: Compose Sms

    Message button to send this message. To add more than one recipient, put a semicolon (;) between each of the phone numbers. Receiver: Type the phone number of the recipient. Text Message: Type the message that you would like to send. Click Send to send your message, or Refresh to clear the message. D-Link DWM-312 User Manual...

  • Page 61: Message Settings

    Message Settings The DWM-312 can be managed remotely over SMS. Get status updates, manage connections, and reboot remotely with a single text. Receive continuous updates about connectivity status. Access control lists and security keys can help protect your router from unwanted remote management.
  • Page 62 Note: The access control settings rely on caller-ID information provided by the phone system, and contain no additional authentication or encryption tools. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 63: Time Settings

    Enter an NTP server to use for time synchronization, or use the drop-down box to select one. Click the Update Now button to synchronize the time with the NTP server. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 64: Firmware Upgrade

    Device Upgrade Here, you can upgrade the firmware of your router. The DWM-312 provides support for both Firmware Over the Air and for manual upgrades. For a manual upgrade, make sure the firmware you want to use is on the local hard drive of the computer and then click Browse to upload the file.

  • Page 65: Module Upgrade

    Internet. If one is available, it will be displayed below. This button will appear if Check File finds new firmware. Click this Update: button to begin the update process. Warning: Do not unplug or power off the device while the update is in progress. D-Link DWM-312 User Manual...

  • Page 66: System Log

    Section 4 - Configuration System Log The DWM-312 keeps a running log of events and activities occurring on the router. You may send these logs to a Syslog server on your network. Enable Logging to Check the box to send the router logs to a Syslog server.

  • Page 67: Schedules

    Select a day of the week for the start time and end time. Start Time Enter the time at which you would like the schedule to become (hh:mm): active. End Time Select the time at which you would like the schedule to become (hh:mm): inactive. D-Link DWM-312 User Manual...

  • Page 68: Reboot And Reset

    Section 4 - Configuration Reboot and Reset Reboot the Device Reboot the Click Reboot to reboot the device. Device: D-Link DWM-312 User Manual...

  • Page 69: Connection Reset

    Date of Month: Select this option if you want the connection reset feature to activate only on a certain day of the month. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWM-312 User Manual...

  • Page 70: Troubleshooting

    1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
  • Page 71 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
  • Page 72 • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DWM-312 User Manual...
  • Page 73 • To change the MTU, enter the number in the MTU field and click Apply to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DWM-312 User Manual...

  • Page 74: Networking Basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 75: Statically Assign An Ip Address

    Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Alternate DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DWM-312 User Manual...

  • Page 76: Technical Specifications

    • Storage : -40 to 85 ˚C (-40 to 185 ˚F) Humidity • Operating: 5% to 85% non-condensing • Storage: 0% to 95% non-condensing Certifications • RoHS • TELEC (optional) • CE • JATE (optional) • FCC D-Link DWM-312 User Manual...
  • Page 77 Available frequencies and speeds vary and may not be available in all regions. Default power adaptor operating temperature range limited to 0 to 40 ˚C (32 to 104 ˚F). An optional power adaptor supports 20 to 60 ˚C (-4 to 140 ˚F). Updated 2017/05/16 D-Link DWM-312 User Manual...

  • Page 78: Regulatory Information

    Note The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link DWM-312 User Manual...
  • Page 79 FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. D-Link DWM-312 User Manual...
  • Page 80 Appendix C - Regulatory Information NCC 警語 ： 以下警語適用台灣地區 依據 低功率電波輻射性電機管理辦法 第十二條: 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功 能。 第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使 用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干 擾。 電磁波曝露量MPE標準值(MPE) 0.9 mW/cm ，送測產品實值為 0.0738 mW/cm 減少電磁波影響，請妥適使用。 D-Link DWM-312 User Manual...
  • Page 81 υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink. com. Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux Français [French] directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à...
  • Page 82 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu można pobrać na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade Português [Portuguese] com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do firmware...
  • Page 83 2014/53/EU. Hela texten med EU-försäkran om överensstämmelse och produkt-firmware kan hämtas från produktsidan på www.dlink.com. Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun Íslenska [Icelandic] 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.
  • Page 84 Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. • Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link DWM-312 User Manual...
  • Page 85 5 Ghz dentro de la UE. • Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link DWM-312 User Manual...
  • Page 86 Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. • Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link DWM-312 User Manual...
  • Page 87 • Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen. • Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link DWM-312 User Manual...
  • Page 88 • Mantenga el producto alejado de los radiadores y de otras fuentes de calor. • Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link DWM-312 User Manual...
  • Page 89 • Houd het product uit de buurt van radiators en andere warmtebronnen. • U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DWM-312 User Manual...
  • Page 90 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
  • Page 91 D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
  • Page 92 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
  • Page 93 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
  • Page 94 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
  • Page 95 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.
  • Page 96 D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.

Table of Contents