Safety Instruction; User Guide; Power Supply For The Product - ECOVACS Deebot D56 User Manual

1.Safety Instruction

NO NO
Guardrail Guardrail
Set up
Guardrail
The User Guide
Please conform to the basic safety precautions as follows:
● Read the content in this user guide carefully and install the robot according to the detailed instructions.
● Safekeeping this guide. If you transfer this machine to another person, please make sure attach this booklet.
● Any inconsistent operation with this guide would probably cause serious damage to both human being and the
machine itself.

Power Supply for the Product

Correct Correct
Electricity
leakage
cleaning
Draw out Draw out
the plug the plug
War ning
stairs and they are not carpeted, you should operate the unit to see that the
unit can detect the step without falling over the edge. It may become
necessary to place a physical barrier at the edge to keep the unit from falling
over the drop but make sure the physical barrier is high enough so that you
or a family member will not trip on the barrier and cause themselves injury.
Note：
Do not open the equipment. The components inside the robot host are beyond repair by
user himself.
This product is only for domestic use, not suitable for industry or outdoor surroundings.
Please do not press LCD.
● The power supply is from a Ni-MH chargeable battery inside the host of the
robot and it is specially assigned with a charging block to do recyclable
charge.
● Please double check the marked supply voltage on the charging block and
make sure it is applied according to the instructions.
● Do not use the damaged power cord or plug, while contact our after-sales
service or find our authorized supplier to maintain.
● As the charging block is heavy, please never drag the block via pulling it's
power cord.
● Remember never twist, swing or screw the power cord excessively.
Neither block it when close the door. Also we should not put heavy
things on the robot as well.
● Do not let power cord touch hot or sharp surfaces.
Cloth
● Do not draw out the plug by pulling the cord.
● Keep wet hands away from the plug or machine.
● Pull the plug out of socket when you no longer use the charging block for
some time.
● Use dry cloth to wipe the dust on the plug frequently.
：
Where there is a drop off in the cleaning area due to a step or
E n j o y S m a r t e r L i f e !
3