To Print In Desired Color Balance (How To Use Color Editor) - Toshiba e-Studio 2040c Imaging Manual

6.3 To Print in Desired Color Balance
Normal procedure
Color Editor
Adjust colors
Store adjustment result
Calibration
Set profiles
File for adjustment
Application
Open the file
Execute print command
Printer Driver
Select profile
Print
Re-adjust
Check result
When a profile is re-adjusted, printing must be
repeated as well.
e-STUDIO2040C/2540C/3040C/3540C/4540C
6. Printer-specific Adjustments (GA-1211)
(How to Use Color Editor)
Effective procedure
Application
Execute print command
Printer Driver
Color Editor
Adjust colors
Test print
Command
WorkStation
Hold queue
Re-adjust
The image adjusted with Color Editor can be
easily printed by saving a file for adjustment
in the hold queue as a PS file. (Only the
sequence of the red arrows is repeated.)
© 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 25
File for adjustment
Open the file
Delete PPD data
Print PS file
xxxx.ps
Download
xxxx.ps
Rename
Calib.ps
Check result