Toshiba e-Studio 2040c Imaging Manual page 303

6. Printer-specific Adjustments (GA-1211)
(7) Select "Thick 2 Paper" for the "Media Type" field in "Output Profile Settings". Also change the name in
"Profile Description" to a comprehensive name, if required. (In the illustration below, the name is changed to
"Thick 2".)
(8) Select "Thick 2 Paper" for "Calibration (Calibration Set)". Then click [OK].
<Hint>
The details of setting items in the Output Profile Settings are as follows:
Profile Description:
Enter the name of the profile displayed on the printer driver menu during two-way communication.
Calibration Set:
Select a Calibration Set to be assigned to the profile so that the calibration data for the selected
media type will be applied to the profile. The calibration data for the media type will be sent from
the Calibration Set to the printer engine when the Measurement Page is printed out during
calibration.
* Never assign a wrong Calibration Set because it is an important setting for image quality.
e-STUDIO2040C/2540C/3040C/3540C/4540C
(7)
(8)
© 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 10