To Obtain Image In Even Density Level - Toshiba e-Studio 2040c Imaging Manual

2.21 To Obtain Image in Even Density Level

Original
When the density is adjusted automatically, the
density on the entire copy image becomes
uneven.
Explanation
When an original with background is copied with the density adjustment set "automatic", the density of the
background may become uneven. To suppress this unevenness, adjust the density manually.
Procedures
* Both the service technician and the user can use all the steps of this adjustment.
(1) Press the [BASIC] tab on the touch panel and then press [
Caution after the adjustment
Nothing in particular
e-STUDIO2040C/2540C/3040C/3540C/4540C
After the adjustment
When the density is adjusted
manually, the density of the entire
copy image is even.
Before the adjustment
] or [ ] to adjust the copy density level.
© 2011 TOSHIBA TEC CORPORATION All rights reserved
2 - 85
2. Copier-specific Adjustments
Feeding
direction
Feeding
direction