Toshiba e-Studio 2040c Imaging Manual page 147

3. Printer-specific Adjustments
(1) Mark the "Pure Gray" checkbox on the printer driver. Select "Text, Graphic & Image" from among the
"Apply to" options. ("Pure Gray" allows gray areas to always be reproduced using only the K toner without
changing the hue of color areas.)
* This adjustment will be effective, only if a file created on a general application, such as Microsoft Office,
is printed. It may not be effective, if a file created on a graphic application (e.g. Illustrator) or a DTP
application (e.g. QuarkXPress) is printed, or a PDF file created on these applications is printed.
For Windows
PCL6 PS3 * This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Mark the "Pure Gray" checkbox in the "Basic" tab. Select "Text, Graphic & Image" from among the "Apply
to" options.
Auto
Text Black (K toner)
Graphic Black (K toner)
Image Color (CMYK toner)
* The above table shows the sample combinations of when the Image Quality Type is "General". When
"Auto" is selected, the areas to be applied are automatically selected according to the Image Quality Type.
e-STUDIO2040C/2540C/3040C/3540C/4540C
Apply to
Text Text & Graphic
Black (K toner) Black (K toner)
Color (CMYK toner) Black (K toner)
Color (CMYK toner) Color (CMYK toner)
© 2011 TOSHIBA TEC CORPORATION All rights reserved
3 - 20
Text, Graphic &
Image
Black (K toner)
Black (K toner)
Black (K toner)