3.18 To Adjust the Image Density in the Toner Save Mode
Before the adjustment
The image density is too dark, even when
printing is performed in the toner save
mode.
Explanation
The e-STUDIO2040C/2540C/3040C/3540C/4540C offers a toner save mode. It is intended to automatically
decrease the image density and reduce the amount of toner used. Adjust the upper limit of the image density in
the toner save mode, in order to obtain the desired image density requested by a particular user.
Procedures
* The service technician must perform all adjustments.
e-STUDIO2040C/2540C/3040C/3540C/4540C
After the adjustment
–
The image density in the toner save mode
is adjustable, as desired.
© 2011 TOSHIBA TEC CORPORATION All rights reserved
3 - 71
3. Printer-specific Adjustments