Toshiba e-Studio 2040c Imaging Manual page 78

(1) Press the [BASIC] button on the Control Panel and select the original mode option, as follows:
• To copy in the Full color or the Auto color mode:
• To copy in the Black mode:
* To have the above original mode options selected by default, use the following procedures:
To change the default original mode on the Control Panel
Use steps (a) to (d) to change default original mode.
(a) Press the [USER FUNCTIONS] button on the Control Panel to enter the "User Functions" menu.
(b) Press the [USER] tab.
(c) Press the [COPY] button.
(d) In the "ORIGINAL MODE FOR COLOR" or "BLACK" option, press the button corresponding to
the desired original mode option.
To change the default original mode in setting mode [08]
Enter setting mode [08]. Change the value for code [9970] or [9976] to change the original mode option,
which is selected by default at power-on.
• In the Black mode
Value for 08-9970
0
1
2
3
4
• In the Full color mode
Value for 08-9976
0
1
2
3
4
5
* Press the [BASIC] button on the Control Panel. Select "Custom" from among the original mode options in
the Black or the Full color mode.
If the [CUSTOM] button is not displayed in the original mode option, change the values for the following
codes to enable the "Custom" mode option.
In the Black mode:
In the Full color mode:
After changing the default original mode option, copy and check the copy image quality.
If further image quality adjustments are still necessary, use the next procedure.
e-STUDIO2040C/2540C/3040C/3540C/4540C
Select the Printed image mode option.
Select the Photo mode option.
Default original mode at power-on
Text/Photo (default)
Text
Photo
Image smoothing
User custom
Default original mode at power-on
Text/Photo (default)
Text
Printed image
Photo
Map
User custom
Enter setting mode [08]. Set "1" for code [7034].
Enter setting mode [08]. Set "1" for code [7614].
© 2011 TOSHIBA TEC CORPORATION All rights reserved
2 - 37
2. Copier-specific Adjustments