Toshiba e-Studio 2040c Imaging Manual page 316

Procedures
* Perform the adjustment in accordance with the procedures below.
(Create profiles > Select Calibration Sets and media types > Perform calibration for each media type)
* Both the service technician and the administrator can use all the procedures.
* All the adjustments will be effective only when images are printed with a PS3 printer driver in the Full color
mode.
* The privilege to operate ColorWise Pro Tools and Command Workstation 5.x are limited to the administrator.
(1) Start up ColorWise Pro Tools or Command Workstation 5.x, and then download a profile to be used for a
certain media type from Profile Manager to the GA-1211. (In case of the profile for a media type is created)
(2) Assign a Calibration Set and media setting for each profile of media types to be used on the Output Profile
Settings menu. The content of the media setting will be linked to the profile.
(3) Perform automatic calibration for the media type assigned to the profile.
(4) Uncheck [Apply to all calibration sets] on the bottom left of the Calibrator menu. Then click [Customize...] to
assign each Calibration Set.
(5) Perform calibration for the GA-1211 for each media using ES-1000 or DTP32.
e-STUDIO2040C/2540C/3040C/3540C/4540C
6. Printer-specific Adjustments (GA-1211)
© 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 23