Toshiba e-Studio 2040c Imaging Manual page 189

3. Printer-specific Adjustments
PCL6 PS3 Mac
(3) Enter adjustment mode [05]. Increase the values for codes [8042 to 8065] to increase the Low/Middle
density of the color.
• Adjust the value for [05] code corresponding to the print option to be applied (PDL and Halftone).
Ex.: • When printing on Windows is performed with the following options selected: PCL6, Image Quality
Type = General, Halftone = Auto
> Text area, graphic area and image area
Change the values for Y: 05-8058, M: 05-8059, C: 05-8060 and K: 05-8061.
• When printing on Macintosh is performed with the following option selected: Image Type =
Photograph, Halftone = Smooth
> Change the values for Y: 05-8050, M: 05-8051, C: 05-8052 and K: 05-8053.
* Printing on Macintosh is performed in PostScript. (See the "PS3" row in the table below.)
Color to
PDL
adjust
PCL5c
Y
PS3
(Yellow)
XPS
PCL5c
M
PS3
(Magenta)
XPS
PCL5c
C
PS3
(Cyan)
XPS
PCL5c
K
PS3
(Black)
XPS
* Set the value in increments of approximately 20, while checking the printouts until the optimum value is
obtained.
e-STUDIO2040C/2540C/3040C/3540C/4540C
* This adjustment will have an effect only on Auto or Color mode printing.
Halftone [05] code Subcode Recommended value
Smooth 05-8058 0/1
Detail 05-8062 0/1
Smooth 05-8050 0/1
Detail 05-8054 0/1
Smooth 05-8042 0/1
Detail 05-8046 0/1
Smooth 05-8059 0/1
Detail 05-8063 0/1
Smooth 05-8051 0/1
Detail 05-8055 0/1
Smooth 05-8043 0/1
Detail 05-8047 0/1
Smooth 05-8060 0/1
Detail 05-8064 0/1
Smooth 05-8052 0/1
Detail 05-8056 0/1
Smooth 05-8044 0/1
Detail 05-8048 0/1
Smooth 05-8061 0/1
Detail 05-8065 0/1
Smooth 05-8053 0/1
Detail 05-8057 0/1
Smooth 05-8045 0/1
Detail 05-8049 0/1
3 - 62
Set a value larger than 128.
© 2011 TOSHIBA TEC CORPORATION All rights reserved
Acceptable
Default
value range
0 to 255 128