Toshiba e-Studio 2040c Imaging Manual page 304

6. Printer-specific Adjustments (GA-1211)
Label in Driver (Appear in One-Way Communication Driver as...):
Set the name of a custom profile (Output-1 to -10) displayed on the printer driver menu during
one-way communication. Note that this setting is not linked to the setting of the media type. The
name set in this section is not displayed but the one set in "Profile Description" is displayed
during two-way communication.
* For the details of two-way communication, refer to the installation guide of the GA-1211.
Media (Setting):
When a certain media type is selected in this setting, the selected media type is assigned to the
profile and then this information is linked to the media information of the printer driver so that a
profile that corresponds to the selected media type will be automatically selected.
The profile is automatically linked to the media type only when "Use Media Defined Profile" is
set for "Output Profile" of "Expert Settings" of the printer driver menu or when [Use Media
Defined Profile] is checked on the bar of the Output field of the Profile Manager menu and also
"Use Server's Default" is set for "Output Profile" of "Expert Settings" of the printer driver menu.
The Media name (e.g. Plain Paper, Recycled Paper, Thick1/2/3/4 Paper, Special1, Special2,
Transparency) is displayed instead of the profile name when the printer driver of a client computer
is set to two-way communication. This setting and the setting of [Appear in One-Way
Communication Driver as] above are mutually exclusive.
e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 11