Toshiba e-Studio 2040c Imaging Manual page 62

Hide thumbs Also See for e-Studio 2040c:
Table of Contents

Advertisement

To make another adjustment of the background for Full color after the above adjustment
* Adjust the density level while checking the color balance since it may differ from that of the original after
the adjustment.
Color mode
Full color / Auto color
(when judged as color)
<Automatic adjustment>
"Full color
<Automatic
adjustment>"
Full color / Auto color
(when judged as color)
<Manual adjustment>
Full color
<Manual adjustment>
* The value for automatic adjustment will be applied only if the automatic copy density mode is selected.
On the other hand, the value for manual adjustment will be applied only if the manual copy density mode
is selected.
* Set the value in increments of approximately 10, while checking the copy image until the optimum value is
obtained.
<Note>
"Making the highlighted area more visible (or increasing the background density)" and
"eliminating the background color (or decreasing the background density)" are mutually
contradictory. If the background color is darkened to make the highlighted area more visible,
the hue of the background may change.
After adjusting the background density, copy and check the copy image quality.
If further image quality adjustments are still necessary, use the next procedure.
(3) Press the [BASIC] button on the Control Panel. Press the [
After increasing the copy density, copy and check the copy image quality.
With the copy density set to the maximum, if further image quality adjustments are still necessary, the
service technician must use the next procedure.
e-STUDIO2040C/2540C/3040C/3540C/4540C
Original mode
[05] code
Text/Photo
05-7744
Text
05-7745
Printed Image
05-7746
Photo
05-7747
Map
05-7748
User custom
05-7762
Text/Photo
05-7749
Text
05-7750
Printed Image
05-7751
Photo
05-7752
Map
05-7753
User custom
05-7763
© 2011 TOSHIBA TEC CORPORATION All rights reserved
2 - 21
2. Copier-specific Adjustments
Recommended
Acceptable
value
value range
Set 128 or larger.
] button to increase the copy density.
Defa
ult
0 to 255
128

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents