Toshiba e-Studio 2040c Imaging Manual page 44

After increasing the sharpness intensity, copy and check the copy image quality.
If further image quality adjustments are still necessary, use the next procedure.
(4) Press the [BASIC] button on the Control Panel. Select "TEXT" from among the original mode options.
* To have "TEXT" selected from among the original mode options by default, refer to procedure (1) in 2.8
To Eliminate Moiré.
After selecting the Text mode, copy and check the copy image quality.
If further image quality adjustments are still necessary, use the next procedure.
(5) Enter adjustment mode [05]. Decrease the values for codes [7097], [7098], [7252], [7102] and [7103] to
make the text darker (improving faint text or thin lines).
Original mode
Text / Photo
Text
User custom
Auto color (when
judged as black)
Text/Photo
Auto color (when
judged as black)
Text
* Set the value in increments of approximately 1, while checking the copy image until the optimum value is
obtained.
After increasing the copy density, copy and check the copy image quality.
If further image quality adjustments are still necessary, use the next procedure.
e-STUDIO2040C/2540C/3040C/3540C/4540C
Recommended
[05] code
value
05-7097
05-7098
05-7252
Set a value smaller
05-7102
than 2.
05-7103
2 - 3
2. Copier-specific Adjustments
Acceptable
value range
0 to 4
© 2011 TOSHIBA TEC CORPORATION All rights reserved
Default
2