Display; Buttons - VDO M2.1 WL Manual

Display

The VDO M2.1 WL has a large, easy-to-read display that can
be divided into three areas.
– The top line of the display permanently indicates
the current speed. If the 12-hour clock format has been
selected, "am" or "pm" appears next to the speed.
The same area also shows whether kmh or mph has been
selected for the speed indicator.
On the left of this line are arrows that indicate whether
the current speed is above or below than the average
speed.
– The middle line of the display shows the name of the
selected function in clear text.
– The bottom line of the display shows the value for the
selected function.

Buttons

The VDO M2.1 WL has two buttons
BIKE
In function mode:
– Access functions
– Reset trip data to zero
(press and hold the button)
In setting mode:
– Scroll in the setting menu
– Change the data to be set
TOP
MIDDLE
BOTTOM
SET
In function mode:
– Scroll backwards through the functions
– Open setting mode
(press and hold the button)
In setting mode:
– Open the setting
– Confirm the setting once ready
– Exit setting mode
and return to function mode
M2.1 WL
3