How To Install Memory Module - Fujitsu PRIMERGY TX200 S2 User Manual

Chapter 7 Installing Hardware Options

7.4.3 How to Install Memory Module

1
Turn off the server and connected devices, and unplug all power cables from
the outlet.
2
Remove the side cover.
"7.2 Removing and Attaching Covers" (pg.176)
3
Touch a metal part of the server to discharge static electricity.
4
Remove the ventilation system cover above the memory slots.
Release the latch on the ventilation system cover and lift it up to remove.
Ventilation
system cover
5
To replace the memory module, open outward the retention clips on both sides
of the slot.
192
Latch
• Make sure not to open the clips outward too quickly because the
memory module may pop up, which could cause damage.