Miscellaneous Information; Identifying Degraded Memory In A System; Identifying Different Memory Sizes In A System Board; Using The Showdevices Command - Fujitsu SPARC Enterprise M3000 Product Notes

Miscellaneous Information

Identifying Degraded Memory in a System

1. Log in to XSCF.
2. Type the following command:
XSCF> showstatus
The following example identifies that DIMM number 00A on CMU#3 has degraded
memory.
XSCF> showstatus
CMU#3 Status:Normal;
* MEM#00A Status:Degraded;
Identifying Different Memory Sizes in a System
Board
To identify if the domain contains system boards with different memory sizes, you
can use either of the following commands to display the list of memory sizes:
showdevices(8) command on the XSCF
■
prtdiag(1M) command on the domain
■

Using the showdevices Command

1. Log in to XSCF.
Chapter 3 Information About Software 71