Table of Contents
Advertisement
Pre Dialing a Call
1. Dial the number you wish to call . To correct a number press the
DELETE button for each incorrect digit.
2. Pick up the handset or press the SPEAKER button.
Receiving a Call
When you receive a call, the telephone rings, the Ringer LED flashes,
and the display shows the CALL# and the caller telephone number
(with caller ID service activated).
This feature allows you to decide to pick up the phone or not
depending on who is calling.
If you want to talk to the caller:
1. Pick up the handset or press SPEAKER button to answer the
call.
2. At the end of the call, return the handset to the cradle or press
SPEAKER button again.
Redial function
If a number that you have dialed is engaged or you were unable to
get through to anybody. The last number dialed will be saved in the
telephone automatically.
To use the redial facility, proceed as follows:
1. Lift the handset or press SPEAKER button.
2. Press the REDIAL button. The last saved redial number will now
be dialled.
Pause
If needed for phone banking or behind a PBX system. You can insert
a 3.6 seconds pause while dialing or storing a number into MEM.
Press REDIAL button at the desired point in number to insert a
pause.
8
Advertisement
Table of Contents
