Storing Two-Touch Memories; Dialing Using Two-Touch Memories - Oricom CARE120 User Manual

Storing Two-touch Memories

1. Press STORE button.
2. Enter the telephone number to be stored (up to 22 digits). Press
STORE button.
3. Enter the name (up to 16 characters) . Press the corresponding
number button one or more times for the first letter (see the
above table). Press STORE button.
4. Press either 0-9 to store the number.

Dialing using Two-touch Memories

1. Lift the handset or press SPEAKER button and wait for a dialling
tone.
2. Press MEM button.
3. Select a memory location by pressing the relevant keypad digit
0-9.
Caller ID
Caller ID allows you to see who is calling before you answer a call
and to see who has called in your absence. If the number is stored in
the indirect memory, its associated name will be displayed instead.
The CID memory will store up to 32 name/telephone numbers stored
chronologically. The sequence number is shown in the top
right-hand side of the display.
When the memory is full, the oldest number will be deleted
automatically as the new call is logged. New calls are indicated in
plain text in the display and flashing of the red New Call indicator
light.
Please note!
In order for numbers to be shown, the Caller ID service must be
provided by your network operator and a current subscription in
place. Contact you telephone service operator for more information.
14