Oricom Loud Clear TP1100 User Manual

Oricom amplified telephone tp1100 userguide

Advertisement

Quick Links

Oricom Amplified
Telephone
TP1100

Advertisement

Table of Contents
loading

Summary of Contents for Oricom Loud Clear TP1100

  • Page 1 Oricom Amplified Telephone TP1100...
  • Page 2 Telecom Faults Service. The Oricom TP1100 telephone is intended to be used by people who are hearing impaired. When they use the telephone its loudness settings are likely to be set for their use.
  • Page 3 Your Oricom TP1100 features Your Oricom TP1100 features Flashing incoming ring indicator Direct memory buttons WARNING: This telephone product is specifically designed for people with hearing difficulties and is provided with a handset earpiece volume control for individual requirements. Due care must be taken by all users that the handset earpiece volume control is set to the lowest level acceptable by each respective user.
  • Page 4: Connecting The Telephone

    Setting up your Oricom TP1100 Setting up your Oricom TP1100 Telephone socket Memory index card Battery Screw compartment Handset curly cord WARNING: Before installing or removing batteries, make sure the telephone is NOT connected to the telephone socket. Connecting the telephone Connecting the telephone 1.
  • Page 5: Ringer Settings

    Ringer settings Ringer settings A switch located on the back of the phone allows the ringer to be switched to Hi, Low, and Off. Note: The ring level will be increased by 10 dB only if you insert the batteries into the battery compartment. Your phone comes with the ringer switched to High and the melody set to <<6>>.
  • Page 6: Volume And Tone Receiving Adjustment

    Volume and tone receiving adjustment Volume and tone receiving adjustment You can increase the volume and adjust the receiving tone to suit your own hearing requirements. The button allows extra receiving and tone functions to be activated during the conversation. When the function is activated, the red light located near the button Adjust the tone and volume levels with the side switches according to your own hearing requirements.
  • Page 7: Last Number Redial

    4. Dial the number you wish to store. 5. Press Note: Numbers will be lost after a few hours if you disconnect your phone from the telephone line. Entering a new number in memory will automatically erase the previous number stored in that location.
  • Page 8: Dialling Stored Numbers

    6-7 mm. Step 4: Install the line cord into the back of the phone and plug the other end into the telephone wall socket. Step 5: Place the phone onto the screw-heads and slide down to secure.
  • Page 9: Warranty Information

    Customer Support Service on 1300 889 785. (b) Exclusion and limitation of liability Oricom will not be in breach of a warranty or condition expressly stated in this User Guide or the Warranty Card or implied by the Trade Practices Act and excludes any...
  • Page 10 If the product is then found to be faulty you will be asked to return it directly to us with a copy of the purchase receipt. Australia Oricom International Pty Ltd Locked Bag 658 South Windsor NSW 2756 Australia...

Table of Contents