Volume Control - Oricom CARE120 User Manual

Volume Control

Handsfree Speaker Volume Control
You can adjust the hands free speaker volume level by simply sliding
the VOLUME switch located on the side of the phone.
Receiver volume control
The receiver volume control enables you to adjust the receiver
volume on the handset. Press the BOOST button, the red LED will
turn on, now you can increase the receiver volume by rotating the
knob (under the receiver) to the desired level ( level 1 to level 9).
Receiver Tone Volume Control
You can use the TONE slide switch to adjust high frequency sounds.
Words are clearer and easier to understand. Note: The tone
adjustment function will not work if the receiver volume is set to the
minimum level.
Shaker operation
You can connect a shaker accessory (not included) to the socket
marked Ext.Trig located at back of your telephone. The shaker will
vibrate when you receive an incoming call.
To purchase a suitable shaker unit in Australia (Model no. VIB100PS)
contact Oricom direct on (02) 4574 8888.
Note: The SHAKER function can only be activated when the power
adaptor is connected (power adaptor supplied with Shaker unit).
VIB1000PS
10