Table of Contents
Advertisement
Recall and call waiting
Press the Recall button followed by the extension number to transfer
calls when connected to a PBX.
Access to additional network services can be gained by using the
Recall button * and # keys. Contact your network operator for more
information.
To Turn on Telstra call waiting (Australia)
You can use the recall button to answer a second call while you are
on the phone. However this service will need to be turned on. For
example to turn on Telstra's Call Waiting service:
1. Lift the handset and wait for dial tone then Press *43#.
2. You will hear the service message and then hang up.
Take two different calls at the same time
During a call, you will hear two loud beeps periodically to notify you
of another incoming call. If you wish to answer this call
1. Press Recall button listen for dial tone then Press 2 to put the
current call on hold and talk with the second caller.
2. Subsequent presses of Recall button listen for dial tone then
Press 2 will toggle you between these 2 callers.
Call Timer
Immediately after dialling a telephone number a call timer will be
shown on the display. The timer is a simple way to help you keep
track of how long the call lasts.
Ringer Volume Control
The ringer sound level can be adjusted by sliding the RINGER
switch to select high (HI) or soft (MID) sound level. When you don't
want to be disturbed, slide the RINGER switch to the Off position.
The bright Red light (LED) on the base will flash with all incoming
calls.
9
Advertisement
Table of Contents
