CyberData 011186 Operation Manual page 76

2. On the Autoprovisioning page, you may enter values for the parameters indicated in
Note
Disable Autoprovisioning
Autoprovisioning Server
Autoprovisioning Filename
Use tftp
Username
Password
Autoprovisioning Autoupdate 
(in minutes)
Autoprovision at time (HHMMSS)
Autoprovision when idle
(in minutes > 10)
Operations Guide
22.
The question mark icon (
after the Toggle Help button is pressed
Table 2-22. Autoprovisioning Configuration Parameters
Web Page Item
) in the following table shows which web page items will be defined
.
Prevent the device from automatically trying to download a
configuration file. See
more information.
Enter the IPv4 address of the provisioning server in dotted
decimal notation.
The autoprovisioning filename is the configuration filename.
The default autoprovisioning filename is in the format of
<mac address>.xml.
Supported filename extensions are .txt, and .xml. The current
filename is denoted by an asterisk at the bottom of the
Autoprovisioning
A file may have any name with an xml extension. If a file
name is entered, the device will look for the specified file
name, and only that file.
The device will use TFTP (instead of http) to download
autoprovisioning files.
The username used to authenticate with an autoprovisioning
server. Leave this field blank to disable authentication.
The password used to authenticate with an autoprovisioning
server. Leave this field blank to disable authentication.
The reoccurring time (in minutes) the device will wait before
checking for new autoprovisioning files. Enter up to 6 digits. A
value of 0 will disable this option.
Note: To use the auto update options, enable the
with NTP Server on boot
Configuration Page
The time of day the device will check for a new
autoprovisioning file. The time must be 6 characters in length
and in HHMMSS format. An empty value will disable this
option.
Note: To use the auto update options, enable the
with NTP Server on boot
Configuration Page
The idle time (in minutes greater than 10) after which the
device will check for a new autoprovisioning file. Enter up to 6
digits. A value of 0 will disable this option.
Note: To use the auto update options, enable the
with NTP Server on boot
Configuration Page
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
930796N
Installing the VoIP Outdoor Intercom
Description
Section 2.4.14.1, "Autoprovisioning"
Page. Enter up to 256 characters.
setting on the
page (see Table 2-7).
setting on the
page (see Table 2-7).
setting on the
page (see Table 2-7).
CyberData Corporation
69
Intercom Setup
Table 2-
for
Set Time
Device
Set Time
Device
Set Time
Device